New Member RX-7 Technical Post your first technical questions here, in an easy flame free environment, before jumping into the main technical sections.

starting issue

Thread Tools
 
Search this Thread
 
Old Oct 17, 2011 | 07:56 AM
  #1  
bigred84's Avatar
Thread Starter
Full Member
iTrader: (1)
 
Joined: Oct 2011
Posts: 113
Likes: 0
From: ohio
starting issue

my 84 gsl se hasn't started yet. i've checked the fuel pump, plugs,ignition. i did a compression check sunday. front: 100 psi ,rear: 105 psi. it's getting too much fuel,because the plugs are soaked in fuel. i'm thinking the injectors are leaking or stuck open or the pressure regulator is bad. any thoughts?
Reply
Old Oct 17, 2011 | 09:41 AM
  #2  
Aaron Cake's Avatar
Engine, Not Motor
Tenured Member: 20 Years
iTrader: (1)
 
Joined: Feb 2001
Posts: 29,798
Likes: 128
From: London, Ontario, Canada
Injectors do go bad occasionally. You can pull the upper intake, take out the fuel injectors with rail and then run the fuel pump to see if they hose fuel.

But are you sure it just isn't massively flooded?
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
stickmantijuana
Microtech
30
Apr 23, 2016 06:37 PM
1993fd3sracer1
3rd Generation Specific (1993-2002)
29
Oct 13, 2015 01:57 PM
1993fd3sracer1
1st Generation Specific (1979-1985)
20
Sep 7, 2015 11:50 AM
FB_Frank85
1st Generation Specific (1979-1985)
6
Aug 31, 2015 03:31 AM
befarrer
2nd Generation Specific (1986-1992)
4
Aug 14, 2015 04:18 PM




All times are GMT -5. The time now is 02:22 PM.