New Member RX-7 Technical Post your first technical questions here, in an easy flame free environment, before jumping into the main technical sections.

So Confused! HELP

Thread Tools
 
Search this Thread
 
Old 03-03-12, 01:38 PM
  #1  
Junior Member

Thread Starter
 
13_bHapPy's Avatar
 
Join Date: Oct 2010
Location: kansas
Posts: 33
Likes: 0
Received 0 Likes on 0 Posts
So Confused! HELP

ok i have a 88 vert NA. dropped a 87 engine in it and info says the 87 needs low imp. injectors. i have the lows and the resistor pack. theres a diff between saturated and peak and hold injectors. whats the diff? i have a vin split in 87 and i ohm tested my injectors there good, i have a n326 ecu and n326 sensors.

The whole problem with this car was i could rap it out in nuetral but when i put it in 1st and start to go it would want to die.. we swapped ecu's(n326, n327, n322 and a couple diff afm and nothing made a diff. it would still want to die under load

i need to know all the sensors and what injectors exactly to put in there. i have the red top 1350 3 ohm injectors but does it matter if there peak and hold.???

All emissions removed, no air pump, no a/c, no power steering. all vacum lines checked all new gaskets, good spark, great compression... please help

87 NA engine
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Captain Hook
2nd Generation Specific (1986-1992)
13
10-04-15 06:35 PM
FC3S Timmy
2nd Generation Specific (1986-1992)
8
10-02-15 08:08 AM
c0rpse
2nd Generation Specific (1986-1992)
16
09-25-15 11:33 AM
doritoloco
New Member RX-7 Technical
7
09-05-15 12:41 PM



Quick Reply: So Confused! HELP



All times are GMT -5. The time now is 07:11 PM.