how do you do a single turbo conversion?

 

Car+Chainsaw+Single Turbo-Twins=Turbo conversion
thats how its done... >_>

 

you're gunna have to give a little more info. Like what kind of car do you have? do you have pretty deep pockets? are you mechanically inclined? did you do any searches on the forum? you aren't the first one to want to do it, and a lot of people are discouraged when they find out everything that has to be done.

 

how to do asingle conversion. take the twins out and replace them with one !

 

-you- don't

 

you go use the search button. exactly how its done!

 

buy a single turbo kit first, then removed your old twin turbo and put it the new 1. its gonna take lots of TIME and MONEY in order to convert to the single turbo.
good luck

 

i wanna know how to eliminate the extra vacuum lines and what else is needed other then the hardware like turbo manifold, turbo ,intercooler, bov and the simple kit stuff. ya i believe i'm veyry mechanically inclinned. i just would like to see some diagrams just to be sure. by the way its a93 rx7.

 

where in alberta r u. I could help or do it for u if u are close to calgary

 

i just need info. and parts for my interior as
well

 

if you don't got anything good to say then don't reply. I'm looking for intelligent answers ok. another thing is i prefer andwers from people who own an fd

 

The problem is, your question was like asking "how do I build a house?". It was far too generic to really provide any answers.

You need to do this:
-purchase single turbo kit
-install standalone EMS system with an upgraded fuel pump and injectors
-install FMIC
-upgrade clutch
-install appropriate gauges
-fabricate things like an intake and downpipe
-tune it

There is a single turbo forum on this website that can help get you started. Take a look at the FAQ in both the single turbo forum and the main FD forum.