Requesting Throttle Body Pictures...
Thread Starter
Junior Member
Joined: Jan 2011
Posts: 16
Likes: 0
From: Georgia
Requesting Throttle Body Pictures...
I Have A Stripped Engine Bay With No Paint And, I Plan To Redo Everything. EVERYTHING. Small Problem. I Painted All My Parts. Took Pictures Prior. But, One Part In Particular Wasn't Documented Well Enough. Take A Guess Which. 
Joined: Sep 2005
Posts: 25,581
Likes: 136
From: Smiths Falls.(near Ottawa!.Mapquest IT!)
https://www.rx7club.com/2nd-generati...-takes-979364/
you may need to UP your post count to access this.Please do it legitimately so I do not need to send you a Nasty PM.
you may need to UP your post count to access this.Please do it legitimately so I do not need to send you a Nasty PM.
Thread Starter
Junior Member
Joined: Jan 2011
Posts: 16
Likes: 0
From: Georgia
I Meant To Edit The Post After I Created The Thread But, It Said I Had To Wait On Mods To Approve It.
Anyway, I Need A Very Detailed Pick Of The 2 Post On The Back Side Of The TB. Specifically, For The Order Of The Pieces That Go On Them.
Even More Specifically, I Would Like To See How The Aft Posts Are Connected.
[The Aft Posts Of A Turbo II FC3S Throttle Body, That Is]...
The Picture Is Exactly As It Was Minus One Nut On The Fwd Side.
Anyway, I Need A Very Detailed Pick Of The 2 Post On The Back Side Of The TB. Specifically, For The Order Of The Pieces That Go On Them.
Even More Specifically, I Would Like To See How The Aft Posts Are Connected.
[The Aft Posts Of A Turbo II FC3S Throttle Body, That Is]...
The Picture Is Exactly As It Was Minus One Nut On The Fwd Side.
Thread Starter
Junior Member
Joined: Jan 2011
Posts: 16
Likes: 0
From: Georgia
@misterstyx69: Or You'll Send Me A Nasty PM?... I Don't Even Know You. 
Either Way, Thank You But, I've Already Been Over That Write-Up... Many, Many Times. I Can't Get The Specific Order From Any Of Those Pictures. + That Vacuum Solenoid Blocks My View After He Puts It Back Together. Plus, I Don't Have All The Excess Stuff On It. It Was Pretty Minimal Prior To Disassembly.
Either Way, Thank You But, I've Already Been Over That Write-Up... Many, Many Times. I Can't Get The Specific Order From Any Of Those Pictures. + That Vacuum Solenoid Blocks My View After He Puts It Back Together. Plus, I Don't Have All The Excess Stuff On It. It Was Pretty Minimal Prior To Disassembly.
Joined: Sep 2005
Posts: 25,581
Likes: 136
From: Smiths Falls.(near Ottawa!.Mapquest IT!)
Thread Starter
Junior Member
Joined: Jan 2011
Posts: 16
Likes: 0
From: Georgia
...I've Been Google Searching This For Quite A While. You Came Across Something I Found In The First Five Minutes. I Downloaded Every One Of Those Pictures & Full-Screened The Most Helpful Ones. They Do Not Show The Detail I Require. This Post Was My Last Resort. It Was Simply A Request. If No One Has A Picture. So Be It.
Joined: Sep 2005
Posts: 25,581
Likes: 136
From: Smiths Falls.(near Ottawa!.Mapquest IT!)
As I mentioned If I come across any more info in my journey I will definitely post it.
There are so many threads it is like a needle in a Haystack just trying to find that "one thing" in a big pile of Cow-doo.
I can only point you to the water,if you are thirsty enough,you will know what to do.
Until then I wish you luck.
Guys help this man out!..those springs on the Cable side are a pain to set on the TB!
There are so many threads it is like a needle in a Haystack just trying to find that "one thing" in a big pile of Cow-doo.
I can only point you to the water,if you are thirsty enough,you will know what to do.
Until then I wish you luck.
Guys help this man out!..those springs on the Cable side are a pain to set on the TB!