rebuild with oil problems
08-13-12, 04:16 PM
#1
Full Member
Thread Starter
Join Date: Jan 2011
Location: Omaha, Ne
Posts: 58
Likes: 0
Received 0 Likes
on
0 Posts
rebuild with oil problems
Hey guys/gals
Just recently rebuilt my motor and am having problems getting oil to my turbo feed line. Is there any possible solutions? i am about to go check to make sure the banjo bolt line isn't blocked. I'm Also having problems sourcing the line for the oil pressure sender. the only real connectors that I can think of is on the main battery harness but i haven't found a good picture with good connection hookups descriptions.
Thanks
Bryan
Just recently rebuilt my motor and am having problems getting oil to my turbo feed line. Is there any possible solutions? i am about to go check to make sure the banjo bolt line isn't blocked. I'm Also having problems sourcing the line for the oil pressure sender. the only real connectors that I can think of is on the main battery harness but i haven't found a good picture with good connection hookups descriptions.
Thanks
Bryan
Thread
Thread Starter
Forum
Replies
Last Post
rxmiles
3rd Generation Specific (1993-2002)
9
08-24-15 02:07 PM