New Member RX-7 Technical Post your first technical questions here, in an easy flame free environment, before jumping into the main technical sections.

Quick turbo Question

Thread Tools
 
Search this Thread
 
Old Feb 19, 2012 | 08:06 PM
  #1  
fcs4manila's Avatar
Thread Starter
S4 Love
 
Joined: Aug 2011
Posts: 119
Likes: 0
From: Bay Area, California.
Quick turbo Question

S4 T2.
Stock.

So just the other day. I noticed my turbo spool being louder than usual at low rpms. I notice it to get loud when the boost guage is at 10 on the Vac.
And it gets louder and higher in pitch if i continue to increase the boost. I don't think I have boost creep, because my boost never goes past 5 psi.

What could have caused the spool to be louder? I'm kind of worried about it and now I nvr rev past 4k rpm.
Reply
Old Feb 19, 2012 | 09:33 PM
  #2  
RotaryRocket88's Avatar
Top Down, Boost Up
Tenured Member 10 Years
iTrader: (7)
 
Joined: Mar 2008
Posts: 8,718
Likes: 6
From: San Diego, CA
You may have had a hose pop off, etc..., which would cause a boost leak, as well as increased noise. A large exhaust leak could also make the turbo sound louder.
Reply
Old Feb 19, 2012 | 11:59 PM
  #3  
fcs4manila's Avatar
Thread Starter
S4 Love
 
Joined: Aug 2011
Posts: 119
Likes: 0
From: Bay Area, California.
Thank you. I'll look into it tomorrow morning. I hope I find a hose popped off somewhere if that's the case.
Reply
Old Feb 20, 2012 | 10:49 AM
  #4  
fcs4manila's Avatar
Thread Starter
S4 Love
 
Joined: Aug 2011
Posts: 119
Likes: 0
From: Bay Area, California.
I think i may have found a culprit. I found a bursted pipe coming from the intake tubing that goes to the BAC. which might also explained having crappy idle lately. I'll go to the store real quick to get a new vacuum hose and see if it fixes the problem.
Thanks RotaryRocket88 for helping me. I'm not sure i would have known where to look for if you didnt say something.
Reply
Old Feb 20, 2012 | 11:50 AM
  #5  
RXSpeed16's Avatar
Theoretical Tinkerer
Tenured Member: 20 Years
Liked
Loved
Community Favorite
iTrader: (41)
 
Joined: Oct 2003
Posts: 1,600
Likes: 49
From: Norcal/Bay Area, CA
Also, it's a good idea to zip tie the ends of that hose to prevent leakage.
Reply
Old Feb 20, 2012 | 02:23 PM
  #6  
fcs4manila's Avatar
Thread Starter
S4 Love
 
Joined: Aug 2011
Posts: 119
Likes: 0
From: Bay Area, California.
Tada. I replaced the hose. And everything's back to normal.
RXSpeed16, Thanks for that suggestion. I'll go ahead and do that right now.
I love zip ties.
Reply
Old Feb 22, 2012 | 10:24 PM
  #7  
RotaryRocket88's Avatar
Top Down, Boost Up
Tenured Member 10 Years
iTrader: (7)
 
Joined: Mar 2008
Posts: 8,718
Likes: 6
From: San Diego, CA
If it's the hose from the charge pipe (between turbo and intercooler), there should already be some OEM spring clamps on it.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
trickster
2nd Generation Specific (1986-1992)
25
Jul 1, 2023 04:40 PM
smikels
Rtek Forum
4
May 12, 2016 12:34 AM
Professorpeanutrx7
New Member RX-7 Technical
5
Aug 15, 2015 01:38 PM




All times are GMT -5. The time now is 12:42 PM.