86 rx7 heater problem
02-22-12, 03:45 AM
#1
Can Post Only in New Member Section
Thread Starter
Join Date: Nov 2011
Location: canada
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
86 rx7 heater problem
hey guys i have a 86 rx7 GXL and the guy before me took off the hoses for the heater. how do i hook up my heater? and where do the hoses go into the fire wall at? thanks
02-22-12, 10:48 PM
#2
The heater core is accessible from underneath the dash on the driver-side. There is a plastic panel covering it. Both the inlet and outlet lines connect via 2 hoses to hardlines going through the firewall. One is above the slave cylinder on the transmission, and the other is near the wiper motor/above the exhaust manifold. The first one I mentioned connects to the rear iron below the oil pressure sender / oil filter via a long formed hose. It's something like $40-60 from Mazda, but it beats running a mile of generic hose behind the engine to prevent kinking.
Thread
Thread Starter
Forum
Replies
Last Post
KAL797
Test Area 51
0
08-11-15 03:47 PM
