New Member RX-7 Technical Post your first technical questions here, in an easy flame free environment, before jumping into the main technical sections.

please help starting problem!!

Thread Tools
 
Search this Thread
 
Old Nov 14, 2011 | 12:09 PM
  #1  
Roberto29's Avatar
Thread Starter
Junior Member
 
Joined: Mar 2011
Posts: 5
Likes: 0
From: dirty jerseyy
please help starting problem!!

i have a 88 gxl it was running fine the other day till i was messing with my sub wire which sparked and melted so i figured right off the bat i fryed somthing but the car started right up fine after that but yesterday morning i came outsideto start it and its trying to start but it wont turn over and if it matters it sounds like its firing faster then usssual too somone please help me this is my car i drive to work everyday i need to fix it fasssssst thank u
Reply
Old Nov 14, 2011 | 09:14 PM
  #2  
v5e_nsx's Avatar
Junior Member
 
Joined: Aug 2011
Posts: 9
Likes: 0
From: california
which wire did you tap into and short out?
Reply
Old Nov 14, 2011 | 09:24 PM
  #3  
satch's Avatar
Moderator
Tenured Member: 20 Years
iTrader: (1)
 
Joined: Jun 2005
Posts: 11,738
Likes: 16
From: tulsa,ok.
Check the 15 amp Engine fuse (interior fuse box), the EGI COMP fuse and the EGI Injector fuse (Engine fuse box).
Reply
Old Nov 15, 2011 | 03:28 PM
  #4  
funkjaw's Avatar
Rotary Freak
Tenured Member 15 Years
iTrader: (3)
 
Joined: Jul 2008
Posts: 2,515
Likes: 4
From: San Jose, CA (NorCal/S.F. Bay Area)
Check all the fuses, also check to see if it is just flooded and not even related to you shorting something out the other day.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
trickster
2nd Generation Specific (1986-1992)
25
Jul 1, 2023 04:40 PM
alphawolff
1st Generation Specific (1979-1985)
17
Nov 17, 2015 05:57 PM
1993fd3sracer1
3rd Generation Specific (1993-2002)
29
Oct 13, 2015 01:57 PM
1993fd3sracer1
1st Generation Specific (1979-1985)
20
Sep 7, 2015 11:50 AM




All times are GMT -5. The time now is 09:19 PM.