oil metering pump
Thread Starter
Junior Member
Joined: Sep 2011
Posts: 35
Likes: 0
From: tulsa ok
oil metering pump
Ok yes im a nood still but i have a question about puting a s4 oil metering pump on an s5 engin will this mess with the preformace of the engin would it be better to use an s5 insted of s4 please all feed back is welcome thanks
No, it's not a direct swap. The S5 pump is electric, and the S5 ECU needs to see a signal from it to avoid going into limp mode (extremely limited performance).
To use an S4 MOP, you would need to swap the front cover of the engine for an S4 one. Then you would need to swap out the ECU, wiring and sensors for S4 versions to avoid limp mode (or a full standalone ECU).
If your S5 MOP has failed (common), you will need to replace it with a working one or get your ECU chipped by Pocketlogger: Rtek7 ECU Upgrade Detailed Information. If you go this route, you must premix 2-stroke oil into your gas.
To use an S4 MOP, you would need to swap the front cover of the engine for an S4 one. Then you would need to swap out the ECU, wiring and sensors for S4 versions to avoid limp mode (or a full standalone ECU).
If your S5 MOP has failed (common), you will need to replace it with a working one or get your ECU chipped by Pocketlogger: Rtek7 ECU Upgrade Detailed Information. If you go this route, you must premix 2-stroke oil into your gas.
Thread
Thread Starter
Forum
Replies
Last Post
trickster
2nd Generation Specific (1986-1992)
25
Jul 1, 2023 04:40 PM
LunchboxSA22
2nd Generation Specific (1986-1992)
37
Oct 26, 2015 10:53 AM
rotor_veux
2nd Generation Specific (1986-1992)
7
Aug 31, 2015 07:49 PM
