New Member RX-7 Technical Post your first technical questions here, in an easy flame free environment, before jumping into the main technical sections.

new toy.

Thread Tools
 
Search this Thread
 
Old Mar 27, 2009 | 02:22 AM
  #26  
Rye_Takahasi's Avatar
Thread Starter
yea, it runs, kinda
Tenured Member 05 Years
 
Joined: Mar 2009
Posts: 111
Likes: 0
From: Eudora, Ks
i washed it and it looks great. the sparatic idle was a vacuum leak.. i think. but now i'm having a problem with it staying running. in park.. or nuetral..it will idle fine.. and you can rev it up just fine.. once i start drving. i can make it like.. a block or so.. and it starts to sputter out and die. sometimes i can slip it in nuetral and feather itand keep it running, but most of the time it just dies. i'm not sure if it's a fuel issue..or electrical ..or sensor. i'm just not sure. any hep or ideas would help me out alot. i haven't disconnected any grounds or anythign and i've looked all the vacumm lines and they're still attached. so now i'm just tring to find out . possibly fuel pressure? i'mgonna check that tomorrow. also gonna look in my tank and see how the baffels look. now that i think about it.. it seemed to happen more when turning or on a hill... but it also does it on flat ground.... its hard for me to explain. but anyhelp would be appreciated.. thanks
Reply
Old Mar 27, 2009 | 02:25 AM
  #27  
Rye_Takahasi's Avatar
Thread Starter
yea, it runs, kinda
Tenured Member 05 Years
 
Joined: Mar 2009
Posts: 111
Likes: 0
From: Eudora, Ks
also .... i know its a huge wish for it to be running well after being sitting for so long. but a guy can dream right?
Reply
Old Mar 27, 2009 | 07:46 PM
  #28  
Rye_Takahasi's Avatar
Thread Starter
yea, it runs, kinda
Tenured Member 05 Years
 
Joined: Mar 2009
Posts: 111
Likes: 0
From: Eudora, Ks
so ..i found that one of the tank straps was loose and my tank was hanging down. but thats not the problem.. fixed it..still screwing up. it will idle just fine it can rev it up ..and it does fine. can hold idle.. and run just fine, i'll pull it out of the shop.. start pulling up the hill.. and once it puts a load on it... it starts to hit a dead zone .. first at 4000 then.. if i rev it up.. dead zone at 3000 .. then at 2000.. then if i rev it.. it dies.can start it right back up .. and rev just fine. its like it is either, losing spark or losing fuel. i'm not sure if it has too little or too high fuel pressure. i'm not using a stock fuel pump, so i'm trying to get another one. any other ideas?
Reply
Old Mar 27, 2009 | 11:38 PM
  #29  
xDspec's Avatar
Full Member
iTrader: (-3)
 
Joined: Mar 2009
Posts: 90
Likes: 0
From: Gresham, OR
if the second pics are what it looks like now, i like what you've done with it =]
Reply
Old Mar 28, 2009 | 12:15 AM
  #30  
Rye_Takahasi's Avatar
Thread Starter
yea, it runs, kinda
Tenured Member 05 Years
 
Joined: Mar 2009
Posts: 111
Likes: 0
From: Eudora, Ks
Originally Posted by xDspec
if the second pics are what it looks like now, i like what you've done with it =]
thanks. i have a couple more pics in an album.. just go to my profile thing. now if i could just get it to stay runnign.. i'd be happy
Reply
Old Mar 28, 2009 | 01:02 AM
  #31  
Grappler's Avatar
Turbo on the brain...
Tenured Member 10 Years
iTrader: (6)
 
Joined: Aug 2008
Posts: 520
Likes: 0
From: Minneapolis
Its looking really nice already, been following along for a while now keep it up.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Snoopy FD
Build Threads
25
Dec 8, 2015 01:45 PM
94touringFD
3rd Generation Specific (1993-2002)
75
Nov 24, 2010 03:10 PM
87turbo2
2nd Generation Specific (1986-1992)
11
Feb 21, 2006 07:17 PM
Miss Mazda
Midwest RX-7 Forum
2
Nov 14, 2005 07:20 AM
Jetlag
3rd Generation Specific (1993-2002)
13
Dec 26, 2001 02:57 AM




All times are GMT -5. The time now is 07:49 PM.