New Member RX-7 Technical Post your first technical questions here, in an easy flame free environment, before jumping into the main technical sections.

New Member 90 TII Issues after rebuild

Thread Tools
 
Search this Thread
 
Old Feb 15, 2019 | 12:02 PM
  #1  
dotts's Avatar
Thread Starter
Junior Member
 
Joined: Feb 2019
Posts: 6
Likes: 0
From: Indiana
New Member 90 TII Issues after rebuild

Now has Rtek1.7 with 725 secondaries, Full Racing beat exhaust, smog pump removed.

Idle Issues, I have disabled the thermowax. Both throttles are closed upon their stops. Added pressure by hand has no effect. When warmed up, idle is at 1500. I can lower rpm to 750 by momentarily removing a vac hose(AWS). It will stay at 750 until the throttle is moved. Then it will return to 1500. When driving it will sometimes return to either 750 or 1500. BAC screw has input when at 750. Lower/front TPS set at 1K(.8 volt) and has an even sweep to 5.2K.

Timing, Set when at 750RPM. Angle sensor against front stop, still 2 degrees more advanced than spec. If I move to the next tooth, it will not be with in the stops. Timing advances properly.

Stock Boost Gauge, Not operating. Moves slightly at the bottom of range when starting.

Thanks Very Much.

Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
dotts
2nd Generation Specific (1986-1992)
9
Mar 11, 2019 10:52 AM
FrankV702
3rd Generation Specific (1993-2002)
16
Apr 30, 2017 11:16 PM
igropemotoko
2nd Generation Specific (1986-1992)
2
Feb 7, 2009 10:19 AM
JP's 93 fd
3rd Generation Specific (1993-2002)
36
Jun 4, 2008 02:10 AM
fabes21
3rd Generation Specific (1993-2002)
9
Mar 5, 2008 09:53 PM




All times are GMT -5. The time now is 07:21 PM.