New Member 90 TII Issues after rebuild
 

Now has Rtek1.7 with 725 secondaries, Full Racing beat exhaust, smog pump removed.

Idle Issues, I have disabled the thermowax. Both throttles are closed upon their stops. Added pressure by hand has no effect. When warmed up, idle is at 1500. I can lower rpm to 750 by momentarily removing a vac hose(AWS). It will stay at 750 until the throttle is moved. Then it will return to 1500. When driving it will sometimes return to either 750 or 1500. BAC screw has input when at 750. Lower/front TPS set at 1K(.8 volt) and has an even sweep to 5.2K.

Timing, Set when at 750RPM. Angle sensor against front stop, still 2 degrees more advanced than spec. If I move to the next tooth, it will not be with in the stops. Timing advances properly.

Stock Boost Gauge, Not operating. Moves slightly at the bottom of range when starting.

Thanks Very Much.