renegarcia68

All,

I have a 1993 RX7 3 Gen and just gout it back from the shop about 3 weeks ago.
This car was in a co-work house in storage for the past 4 years so I know there will be littel issue along the lines.

I have located 3 leaks on my car

1. Leak under the upper intake manifold. ( Coolant line need to be replace)

2. The O-Rings under the oil filter need to be replace.

3. Frount crank seal need to be replace.

I am about to attemp to repair 1 & 2 ; But I have never worked on a car like this one. I am unclear on what steps need to be taken when removing the uopper intake.

1. Is there and fuel line that will leak when I remove the intake?
2. Would it be better to remove the throttle body and intake off as one pice?
3. Is there a way to replace the throttle body coolant line with out taking the intake off. This coolant line has 2 leaks on it next to the throttle body and half way down the coolant line . So I know it needs to be replace. I am just looking for help on how and what would be the best way to fix this issue.

I will be trying to fix this issue this weekend and any advice would be great.

Thanks,

Rene

Aaron Cake

iTrader: (1)

1. No.

2. Yes.

3. If you have very tiny hands and can contort into odd shapes, then it might be possible. But I've never seen anyone do it on any generation of RX-7 without removing the upper intake.

renegarcia68

Thanks for the info:

I have finnish the repairs on 1 and 2 and now I have to find a shop in Houston to replace the front crank seal that might have a leak.