My 1987 RX7 won't start
#1
Junior Member
Thread Starter
Join Date: Mar 2015
Location: Louisiana, US
Posts: 5
Likes: 0
Received 0 Likes
on
0 Posts
My 1987 RX7 won't start
I have a 1987 Mazda RX7 Turbo2 that hasn't run in a couple of years, I've gone over everything to get it ready to crank up but when I turn the key nothing happens. All fuses are good and I have a brand new battery. The car is getting power but no ignition, would this possibly be a bad coil/ignitor? Thanks for any help.....
#2
heynoman
iTrader: (5)
I have a 1987 Mazda RX7 Turbo2 that hasn't run in a couple of years, I've gone over everything to get it ready to crank up but when I turn the key nothing happens. All fuses are good and I have a brand new battery. The car is getting power but no ignition, would this possibly be a bad coil/ignitor? Thanks for any help.....
#4
Moderator
iTrader: (1)
W/key to start and the clutch depressed the thicker of the two Black/Green wires at the starter cut relay should have power. If it doesn't then the clutch interlock switch, as previously mentioned, could be the issue. The starter relay is located next to the main relay and has but one plug with four wires.
Trending Topics
#10
Moderator
iTrader: (1)
You pop the hood. You look at the inside of the driver's side fender near the the fire wall. If you have the starter relay it will be bolted to the fender and be next to the main relay. And if you own a car you need to understand the car and there's no better way than to look through the FSM which will tell you what you need.
Thread
Thread Starter
Forum
Replies
Last Post
trickster
2nd Generation Specific (1986-1992)
25
07-01-23 04:40 PM