New Member RX-7 Technical Post your first technical questions here, in an easy flame free environment, before jumping into the main technical sections.

motor swap help needed

Thread Tools
 
Search this Thread
 
Old 06-10-09, 05:20 PM
  #1  
Junior Member
Thread Starter
 
eberendsen's Avatar
 
Join Date: Jun 2009
Location: midwest
Posts: 4
Likes: 0
Received 0 Likes on 0 Posts
motor swap help needed

Alright, I feel like a DA! This is my 9 RX-7. I have had a lot of first gens and some 2nd gens. I even have a 90 that I popped a 351C under the hood in. I currently have the afore mentioned 90, and an 85 and an 80. The questions I have are concerning the 80 & 85. I have searched a lot of threads and am a little confussed. My 85 engine is locked. My 80 engine only has 72k on it and runs fine. The 85 is a 5speed while the 80 is an auto. The 80 is shot body and interior wise. So, i'm putting the 80 motor in the 85 body. I know about the exhaust differences but am confussed about the flywheel and balancing. Also, the 80 has a small er radiator and larger oil cooler than the 85. What is the easiest way to rebalance the engine for the fit into the 85? Any help would be appreciated.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Machupicchu
1st Generation Specific (1979-1985)
8
08-17-15 08:27 PM
Professorpeanutrx7
New Member RX-7 Technical
5
08-15-15 01:38 PM



Quick Reply: motor swap help needed



All times are GMT -5. The time now is 05:47 PM.