Master Cylinder
Thread Starter
Junior Member
Joined: Sep 2012
Posts: 8
Likes: 0
From: Wolfforth, Tx
Master Cylinder
Hey guys, ive recently started rebuilding/restoring my 84 gs again after sitting untouched for 11yrs. My question is the master cylinder. I put in an LSD w/ disc brakes off of a gsl many many years ago. And I believe the master cylinder is original. Im replacing the master, and do I buy one for a car with drum brakes or disc brakes? Wondering what the difference is between the 2, if i have to run different lines or something.
Thanks,
Kyle
Thanks,
Kyle
welcome to the board. 
i'll start by saying this: I've swapped quite a few drum rears to disc rears and so far have not run into any master cylinder issues.
however, many places list different part numbers for them, so if you're at a point where you have to buy a new one anyway, then just get the one that's for the GSL and you should be fine.
also, here's a related link and hopefully you're actually curious enough to read it and look at links there within.
https://www.rx7club.com/1st-generati...linder-859078/
i'll start by saying this: I've swapped quite a few drum rears to disc rears and so far have not run into any master cylinder issues.
however, many places list different part numbers for them, so if you're at a point where you have to buy a new one anyway, then just get the one that's for the GSL and you should be fine.
also, here's a related link and hopefully you're actually curious enough to read it and look at links there within.
https://www.rx7club.com/1st-generati...linder-859078/
