injectors in xcessve lim
10-24-11, 12:02 AM
#1
Junior Member
Thread Starter
Join Date: Sep 2011
Location: tasmania
Posts: 5
Likes: 0
Received 0 Likes
on
0 Posts
injectors in xcessve lim
hey guys ive got a xcessive lim with the 4 port fuel rail, what i was
wondering is that if its possible to run 2 different size injetors in one
rail? eg. 1000cc primarys and 1600cc secondaries?
wondering is that if its possible to run 2 different size injetors in one
rail? eg. 1000cc primarys and 1600cc secondaries?
10-26-11, 01:49 AM
#3
Junior Member
Thread Starter
Join Date: Sep 2011
Location: tasmania
Posts: 5
Likes: 0
Received 0 Likes
on
0 Posts
well there are only 4 injectors so i cant see why not, running a haltech sprint re, i just havent seen it done anywhere, looked around at what other people are running an they are either running 4 the same size or keeping the primarys in the stock location,
10-26-11, 09:07 AM
#4
Engine, Not Motor
iTrader: (1)
Join Date: Feb 2001
Location: London, Ontario, Canada
Posts: 29,789
Likes: 0
Received 108 Likes
on
91 Posts
Oh, you want to move the primaries? Why? They are positioned close to the ports and within the runners fed by the primary throttle plate to promote atomization. Moving them would really only be something done on an engine that won't ever see low RPM.
10-27-11, 10:05 AM
#7
Engine, Not Motor
iTrader: (1)
Join Date: Feb 2001
Location: London, Ontario, Canada
Posts: 29,789
Likes: 0
Received 108 Likes
on
91 Posts
No reason to move them. Moving them farther up the runners will just mean you'll need to run more primary duty cycle to combat wall wetting from the injectors. It will take more fuel to achieve the same throttle response, and there will always be some throttle response lag. There's really no reason to do this. Mazda has kept the same primary injector location since the turbo 12A for a reason. 
