harness issue?
Thread Starter
Junior Member
Joined: Oct 2013
Posts: 22
Likes: 0
From: Tucson, Arizona
harness issue?
hi all, so heres a backround of the car...
rebuilt stock port
running single turbo
single turbo harness mod
ets fmic
emissions delete
PFC
850, 1680 injectors
now the problem is that now that im done bolting everything back in and put the car into the on position there is no fuel pressure and no power to the ignition i beleave (my aftermarket gauges tie to the steering coloumb ign 12v source)
the headlights work, windows work, the radio works, and the stock gauges (all the lights light up though)
could it be a bad ground? what would cause this?
thank you for any help you can provide!
rebuilt stock port
running single turbo
single turbo harness mod
ets fmic
emissions delete
PFC
850, 1680 injectors
now the problem is that now that im done bolting everything back in and put the car into the on position there is no fuel pressure and no power to the ignition i beleave (my aftermarket gauges tie to the steering coloumb ign 12v source)
the headlights work, windows work, the radio works, and the stock gauges (all the lights light up though)
could it be a bad ground? what would cause this?
thank you for any help you can provide!
Joined: Sep 2005
Posts: 25,581
Likes: 136
From: Smiths Falls.(near Ottawa!.Mapquest IT!)
..and the car is?
94 Rx7?..FD?
(please state this in the future.Not many people like to investigate your profile in order answer your questions).
94 Rx7?..FD?
(please state this in the future.Not many people like to investigate your profile in order answer your questions).
Thread Starter
Junior Member
Joined: Oct 2013
Posts: 22
Likes: 0
From: Tucson, Arizona
thank you, does anyone have pictures of the location? i looked at the ecu side harness and it looks like there was a ground clip tucked away that i forgot but i cant find where it goes to
Thread
Thread Starter
Forum
Replies
Last Post
yetter227
2nd Generation Specific (1986-1992)
20
Sep 5, 2015 11:57 PM