yammo7013

Did a engine swap and knew my o2 sensor wasnt hooked up. So I figured when i swapped the used engine I'll look for it. Well couldnt find it..and I dont want to unloom the harness and find the wire. So is there a ecu pinout so i can run a wire from the o2 sensor to the ecu?

RotaryRocket88

iTrader: (7)

What car? FC like you profile mentions? Missing 02 sensor wires are pretty common. Go to the 2nd gen FAQ and follow the links to the manuals. ECU pin outs are in the fuel/emission sections.

yammo7013

Yaa fc sry about that and ok sounds good thanks

yammo7013

I couldn't find the pinout..there was something like it but didn't look like it. I'm on my phone so maybe i skimmed passed it

DC5Daniel

iTrader: (10)

I know you said you didn't want to unloom, but why not? It's much simpler than running a new wire from the ECU in the cabin. You wouldn't have to go further than 3 inches back into where the wire is supposed to emerge.

yammo7013

Well where does it emerge from?

yammo7013

Does anybody know? Where is the o2 sensor suppose to come from near the injectors? And btw I couldn't find the pin out in the FSM perhaps different page?

satch

iTrader: (1)

The pinout for the S4 is different than the S5. And the pinout diagram can be found in the electrical diagram. On an S4 it is pin 2D and S5 it's pin 2C.

Mattred

Im currently running my FC without a 02 sensor. My headers didnt have a place for them and the muffler shop was being cheap. So far I have seen little to no difference in gas mileage.. Its always been pretty bad... So maybe its not been working lol...

yammo7013

Yuupp still can't find it...I looked under body electrical and engine electrical and nothing unless I'm blind..

satch

iTrader: (1)

S4 or S5???????????

S4 https://www.rx7club.com/2nd-generati...pinout-968998/

yammo7013

S5 sry

satch

iTrader: (1)

https://docs.google.com/file/d/0Bzy-...hl=en_US&pli=1