Getting my Weber 45dcoe on my 13b to idle correctly
04-06-22, 08:10 AM
#1
Newbie
Thread Starter
Join Date: Apr 2022
Location: hosuton
Posts: 3
Likes: 0
Received 0 Likes
on
0 Posts
Getting my Weber 45dcoe on my 13b to idle correctly
What idle jets and fuel jet sizes do I need to get my Rx7 to idle and accelerate firmly with power!
It’s a 13b used to be fuel injection, did a carb swap with 12a components but 13b housings
at the moment with the stock Weber I bought car runs but not great
It’s a 13b used to be fuel injection, did a carb swap with 12a components but 13b housings
at the moment with the stock Weber I bought car runs but not great
Last edited by dreamzzwork; 04-06-22 at 08:25 AM.
04-06-22, 10:08 AM
#2
welcome to the board. 
what pump and regulator are you running? also, what is the current setup of the Weber?
here's a thread that may be helpful: https://www.rx7club.com/1st-generati...-weber-323422/
what pump and regulator are you running? also, what is the current setup of the Weber?
here's a thread that may be helpful: https://www.rx7club.com/1st-generati...-weber-323422/
Thread
Thread Starter
Forum
Replies
Last Post
pinoyremix
1st Generation Specific (1979-1985)
4
03-21-16 11:10 PM