first rebuild
#1
Junior Member
Thread Starter
Join Date: Aug 2010
Location: Valley View Pa
Posts: 18
Likes: 0
Received 0 Likes
on
0 Posts
first rebuild
I got a 93 rx7 single turbo, I am getting my first motor rebuilt and i am concerned about what all i should have done to it. Right now i am running a microtech stand alone tuned to 20 psi but it currently running 12 psi.. I have a xps intercooler, full race exhaust, street port and polished, as far as exact motor work done and tune specifics they are unknown at this time. Also what kind of oil should i run for the first time?
#2
Moderator
iTrader: (7)
The builder will suggest an oil. (Aside from changing often during breakin, I don't think it's a critical thing)
If you want to have a streetable car, I'd go with a medium street port. If you go bigger you're making serious compromises in fuel economy, noise, driveability, etc.
Who is doing the rebuild?
David
If you want to have a streetable car, I'd go with a medium street port. If you go bigger you're making serious compromises in fuel economy, noise, driveability, etc.
Who is doing the rebuild?
David
Thread
Thread Starter
Forum
Replies
Last Post