firing
#1
RXCRAZY
Thread Starter
Join Date: Feb 2010
Location: Norht Myrtle Beach, SC
Posts: 7
Likes: 0
Received 0 Likes
on
0 Posts
firing
I have an 88 RX-7 that will turn over but will not fire. I just bought the car a few days ago but it has been sitting for about 4 to 5 yeasrs. Could it be that the gas is just bad or I am I looking at more server problems?
#2
Right near Malloy
iTrader: (28)
Join Date: Dec 1999
Location: Behind a workbench, repairing FC Electronics.
Posts: 7,840
Received 505 Likes
on
342 Posts
I'd definitely drain the old fuel.
See if it'll start on starting fluid.
Also, verify that it has spark to the spark plugs. You can do this by putting an old spark plug into the plug wire and placing it so that the threaded part of the plug touches a bare metal object in the engine bay.
Have an assistant crank the engine while you watch the plug.
See if it'll start on starting fluid.
Also, verify that it has spark to the spark plugs. You can do this by putting an old spark plug into the plug wire and placing it so that the threaded part of the plug touches a bare metal object in the engine bay.
Have an assistant crank the engine while you watch the plug.
Thread
Thread Starter
Forum
Replies
Last Post
LongDuck
1st Generation Specific (1979-1985)
12
10-07-15 08:12 PM
ls1swap
3rd Generation Specific (1993-2002)
12
10-01-15 07:58 PM