FC rearend swap
Thread Starter
Full Member
Joined: Aug 2013
Posts: 151
Likes: 1
FC rearend swap
Hey, I was reading and someone posted
"on an FC- you can swap in a C4 or Viper rear end. There are stub axles available that adapt the stock axles to the different diff. This does require some fabbing, & it is a relatively cheap route." Has anyone done this? How much fab & cost??
"on an FC- you can swap in a C4 or Viper rear end. There are stub axles available that adapt the stock axles to the different diff. This does require some fabbing, & it is a relatively cheap route." Has anyone done this? How much fab & cost??
Joined: Sep 2005
Posts: 25,581
Likes: 136
From: Smiths Falls.(near Ottawa!.Mapquest IT!)
The easiest way to answer this question is for you to find that post and PM the guy who posted it.
The TII rear end is Capable of around 450 hp easy,so If you have that or More in mind you should be looking at what the V8 swap guys are running.You can browse the threads in that section.
The TII rear end is Capable of around 450 hp easy,so If you have that or More in mind you should be looking at what the V8 swap guys are running.You can browse the threads in that section.
Thread
Thread Starter
Forum
Replies
Last Post
Jeff20B
1st Generation Specific (1979-1985)
73
Sep 16, 2018 07:16 PM
gtcd
1st Generation Specific (1979-1985)
3
Sep 17, 2015 01:15 PM
gabescanlon
3rd Generation Specific (1993-2002)
2
Sep 15, 2015 06:57 AM
jakeishness
2nd Generation Specific (1986-1992)
11
Sep 11, 2015 11:33 AM