Emission Hose Cracked
#1
Can Post Only in New Member Section
Thread Starter
Join Date: Mar 2010
Location: Texas
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
Emission Hose Cracked
Hello All,
I have a 84 GSL with a 12A. I have two parts that the Mazda dealer no longer manufactures and I cannot seem to find them at any auto or hardware store. The first part is the top bolt for my air pump that's about 4 inches long. I thought about going to Graingers to see if they may have one but I do not know the bolts diameter. The second part a hose that comes out of the bottom of the air filter cover. It is the hose at the bottom of the picture that connects to the idle compensator hose. With the inside diameter of each end is different I was wondering if someone could suggest how I could make one. Any help would be gratefully appreciated.
I have a 84 GSL with a 12A. I have two parts that the Mazda dealer no longer manufactures and I cannot seem to find them at any auto or hardware store. The first part is the top bolt for my air pump that's about 4 inches long. I thought about going to Graingers to see if they may have one but I do not know the bolts diameter. The second part a hose that comes out of the bottom of the air filter cover. It is the hose at the bottom of the picture that connects to the idle compensator hose. With the inside diameter of each end is different I was wondering if someone could suggest how I could make one. Any help would be gratefully appreciated.
#3
Can Post Only in New Member Section
Thread Starter
Join Date: Mar 2010
Location: Texas
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
Just to let you know I called Rotary Performance in Garland. The bolt is 8x1.25x100MM. And the hose has one size of 3/16id and the other end is 1/4id.
Thread
Thread Starter
Forum
Replies
Last Post
24seven_dada
3rd Generation Specific (1993-2002)
20
11-10-18 12:03 PM