Dead 88 rx7 turbo 2...advice?
#1
Junior Member
Thread Starter
Join Date: Sep 2010
Location: Austin, TX
Posts: 10
Likes: 0
Received 0 Likes
on
0 Posts
Dead 88 rx7 turbo 2...advice?
So ATM my turbo 2 is broke down, i was driving home tonight when the clutch pedal went soft and stuck to the floor, i got my car within a hundred yards of my house when it died and the clutch went to the floor again, when i tried starting the car again i wouldnt start doesnt seem like there is any compression at all and the was some smoke coming out of the exhaust.....
So any advice on what could have went wrong with my car im just curious?
ill be taking the car to MZM performance here in Austin soon so i should be in good hands
So any advice on what could have went wrong with my car im just curious?
ill be taking the car to MZM performance here in Austin soon so i should be in good hands
#2
Top Down, Boost Up
iTrader: (7)
The clutch has zip to do with the engine being "dead" or not. If the pedal can get stuck on the floor, you most likely have a clutch hydraulic problem. There could be an external leak at the master, slave or clutch hose, or you could have an internal leak inside the master cylinder.
#4
haha sounds like me... yea for some reason my 86 na wont start now and had nothing wrong with it the day before.. all fuses are good its pulsing when i crank on it. i have a switch for my fuel pump so its on when im cranking off when im not.
#5
Junior Member
Thread Starter
Join Date: Sep 2010
Location: Austin, TX
Posts: 10
Likes: 0
Received 0 Likes
on
0 Posts
alright guys ill change the slave and master, and i think i blew a seal finally after 210k miles something had to give out lol im just glad it went out in my spare time, theres no compression at all, it cranks just wont fire up, time to rebuild =]
Thread
Thread Starter
Forum
Replies
Last Post
KAL797
Test Area 51
0
08-11-15 03:47 PM