New Member RX-7 Technical Post your first technical questions here, in an easy flame free environment, before jumping into the main technical sections.

Coolant level sensor

Thread Tools
 
Search this Thread
 
Old 12-15-09, 08:35 PM
  #1  
Junior Member
Thread Starter
 
Snowman6479's Avatar
 
Join Date: Nov 2009
Location: DFW
Posts: 12
Likes: 0
Received 0 Likes on 0 Posts
TX Coolant level sensor

I have a 1991 N/A 7 and the coolant level sensor in the radiator has a 6 inch wire on it with a connector.. then the wire it hooks into on my car has about 2 foot of wire that has been cut.. my question is anybody with a S5 can go out and give me an idea which way the wire is routed so I can hopefully find the other end of it.. Pictures will help if at all possible.. Thanks J-rad
Old 12-15-09, 10:27 PM
  #2  
Top Down, Boost Up

iTrader: (7)
 
RotaryRocket88's Avatar
 
Join Date: Mar 2008
Location: San Diego, CA
Posts: 8,718
Likes: 0
Received 6 Likes on 4 Posts
I can tell you offhand that the wire comes from the driver-side of the car. It is part of the front harness, which starts behind the dash, then goes into the engine bay on the driver-side & wraps around to the front passenger side.
Old 12-15-09, 10:48 PM
  #3  
Junior Member
Thread Starter
 
Snowman6479's Avatar
 
Join Date: Nov 2009
Location: DFW
Posts: 12
Likes: 0
Received 0 Likes on 0 Posts
Thanks I will start my search there.. I am more likely looking for the point it comes out of the harness.. or a close aproximation where it does. I konw it needs to be somewhere within about 24 inches of the sensor but for the life of me cannot find it
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
JoesFC
2nd Generation Specific (1986-1992)
9
10-05-15 08:10 AM
rotary_rx7fc
1st Generation Specific (1979-1985)
20
09-19-15 02:41 PM



Quick Reply: Coolant level sensor



All times are GMT -5. The time now is 02:06 AM.