New Member RX-7 Technical Post your first technical questions here, in an easy flame free environment, before jumping into the main technical sections.

convertable top not working

Thread Tools
 
Search this Thread
 
Old Sep 1, 2012 | 10:14 PM
  #1  
RyuCyclone's Avatar
Thread Starter
Junior Member
 
Joined: Aug 2012
Posts: 0
Likes: 0
From: Nevada
convertable top not working

i own an 88 rx-7 convertable and the top wont go down, i have checked the fuses but none were burnt. it will go up surprisingly. could it be a relay? and is there a manual way to put it down.
Reply
Old Sep 5, 2012 | 07:10 AM
  #2  
darksider415's Avatar
Junior Member
 
Joined: Oct 2008
Posts: 9
Likes: 0
From: Alabama, United States
It can be put down manually, and there is, buried somewhere in the owner's manual, a procedure for doing so. IIRC, you have to pull off the cover behind the seats, and then it should be somewhat obvious.

I'd check the switch and clean it, before I'd go chasing relays, though. It /should/ be the same relay in both directions, but I'd have to drive a couple of hours to check mine.
Reply
Old Sep 5, 2012 | 07:08 PM
  #3  
misterbee6's Avatar
Junior Member
 
Joined: Nov 2010
Posts: 1
Likes: 0
From: Los Angeles
CA

Originally Posted by darksider415
It can be put down manually, and there is, buried somewhere in the owner's manual, a procedure for doing so. IIRC, you have to pull off the cover behind the seats, and then it should be somewhat obvious.

I'd check the switch and clean it, before I'd go chasing relays, though. It /should/ be the same relay in both directions, but I'd have to drive a couple of hours to check mine.
You can crank it up and down with a screwdriver, but its not something you want to do on a regular basis. I would start troubleshooting by testing the various relays that control the top.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
CaptainKRM
2nd Generation Specific (1986-1992)
14
Aug 26, 2015 09:52 PM
Professorpeanutrx7
New Member RX-7 Technical
0
Aug 18, 2015 03:09 PM




All times are GMT -5. The time now is 02:58 AM.