New Member RX-7 Technical Post your first technical questions here, in an easy flame free environment, before jumping into the main technical sections.

Boost problem.

Thread Tools
 
Search this Thread
 
Old 09-04-11, 07:15 PM
  #1  
Rotary Enthusiast

Thread Starter
iTrader: (19)
 
lOOkatme's Avatar
 
Join Date: Apr 2002
Location: Colorado Springs, CO
Posts: 1,169
Likes: 0
Received 11 Likes on 10 Posts
Boost problem.

I bought an RX7 and now I realize that I am not getting full boost. I am getting a solid 6-7PSI of boost right now. The mods are listed below.

93 RX7 FD
Non-sequential stock turbo's
Blitz dual spec S boost controller
DP/MP/Cat back
Intake
FMIC
efni Y-pipe and crossover tube.


I get the same boost regardless of the settings on the boost controller.

I have done a leak test from right after the crossover tube (intercooler piping) and checked the entire intercooler and cold side of engine for leaks. Nothing found...I tested to 15PSI.

I am now wondering if I have a boost leak by the turbo's somewhere...gasket or something? Or if my boost controller is not functioning properly....and I am running off the wastegate spring pressure?

Here are two video's...one at idle....and another showing the boost....Please listen to the sound of the clip......does the sound give any indication of a leak? or is the change in sound the wastegate?

Just trying to solve this damn problem.

At idle
http://www.youtube.com/watch?v=C_MvTUeBXpk

car under acceleration.
http://www.youtube.com/watch?v=xJ7y5zWUEWs
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Jeff20B
1st Generation Specific (1979-1985)
73
09-16-18 07:16 PM
stickmantijuana
Microtech
6
11-21-15 10:20 AM
Bauer778
3rd Generation Specific (1993-2002)
10
11-04-15 04:42 PM
vmerino
2nd Generation Specific (1986-1992)
0
09-05-15 11:26 AM
High_Carb_Diet
Power FC Forum
1
09-05-15 09:07 AM



Quick Reply: Boost problem.



All times are GMT -5. The time now is 10:10 PM.