New Member RX-7 Technical Post your first technical questions here, in an easy flame free environment, before jumping into the main technical sections.

Bönez Turboflo Exhaust System

Thread Tools
 
Search this Thread
 
Old Oct 11, 2013 | 03:38 AM
  #1  
swingminx's Avatar
Thread Starter
Junior Member
 
Joined: May 2013
Posts: 8
Likes: 0
From: Sweden
Bönez Turboflo Exhaust System

Hi!
Im thinking of buying this system to my Rx7 TII - 89.
I have a Racingbeat catback, other than that my TII is stock.

Can i install this system without any risk to the motor? I have read that a fuel-cut defenser is a must, but i don´t want that. I just want to have more exhaust sound

Or should i just go for the "Bönez Catalytic Converters", will i be "safe" then regarding the Engine?

Greetings from sweden
// Per
Reply
Old Oct 19, 2013 | 04:59 AM
  #2  
swingminx's Avatar
Thread Starter
Junior Member
 
Joined: May 2013
Posts: 8
Likes: 0
From: Sweden
No one?

If i run this system, will the boost increase at all? Need to worry about more fuel?
Reply
Old Oct 22, 2013 | 03:31 PM
  #3  
RXSpeed16's Avatar
Theoretical Tinkerer
Tenured Member: 20 Years
Liked
Loved
Community Favorite
iTrader: (41)
 
Joined: Oct 2003
Posts: 1,600
Likes: 49
From: Norcal/Bay Area, CA
As long as you keep a quality catalytic converter in the exhaust, boost pressure should not be affected. I run a 3" Bonez cat on an un-ported S5 wastegate and it has no issues keeping the boost at stock levels.

I'm not sure if the sound will change much. If it were me, it wouldn't be worth it to buy one and ship internationally.

I don't think many people have experience with that system. When most people upgrade the exhaust, they delete the catalytic converter because it has better performance and it is much cheaper. But that requires other modifications to the wastegate and/or fuel system modifications.
Reply
Old Oct 22, 2013 | 03:42 PM
  #4  
swingminx's Avatar
Thread Starter
Junior Member
 
Joined: May 2013
Posts: 8
Likes: 0
From: Sweden
Thanks for your input
But in a near future i must replace the old(original) catalytic.
So which one should i choose? I imagine that mazda original will be expensive?
The bönez catalytic converter is the only aftermarket cat i know of.
Reply
Old Oct 22, 2013 | 04:16 PM
  #5  
diabolical1's Avatar
Moderator
Tenured Member: 20 Years
Liked
Loved
Community Favorite
iTrader: (3)
 
Joined: Feb 2002
Posts: 10,998
Likes: 349
From: FL
check out HJS
Reply
Old Oct 22, 2013 | 04:21 PM
  #6  
swingminx's Avatar
Thread Starter
Junior Member
 
Joined: May 2013
Posts: 8
Likes: 0
From: Sweden
Where can i buy HJS? I did a quick search on google and all i found was rx8.
Reply
Old Oct 23, 2013 | 08:00 AM
  #7  
diabolical1's Avatar
Moderator
Tenured Member: 20 Years
Liked
Loved
Community Favorite
iTrader: (3)
 
Joined: Feb 2002
Posts: 10,998
Likes: 349
From: FL
well, i figured fabrication wouldn't be an issue. if it is, then you're probably painting yourself into a corner.
Reply
Old Oct 23, 2013 | 10:16 AM
  #8  
RXSpeed16's Avatar
Theoretical Tinkerer
Tenured Member: 20 Years
Liked
Loved
Community Favorite
iTrader: (41)
 
Joined: Oct 2003
Posts: 1,600
Likes: 49
From: Norcal/Bay Area, CA
I'm not sure how strict Swedish laws are about replacement catalytic converters. So you may want to check that. It may depend if it is a LHD or RHD model as that changes what emissions equipment it was equipped with.

Here in California, we have to buy an approved pre-fabricated catalytic converter to pass the visual inspection. It is probably the stupidest idea ever. There is very little difference in actual performance.

I've had no problems with my Bonez cat. It hasn't broken down and it still passes the smog test.
A Magnaflow cat will pass the emissions test, but it usually breaks down in a couple years. You could also buy a new one and only use it for inspections. That way, it would last the life of the car.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
82streetracer
1st Generation Specific (1979-1985)
7
Aug 23, 2015 09:28 AM
GrossPolluter
General Rotary Tech Support
7
Aug 22, 2015 11:23 PM




All times are GMT -5. The time now is 04:05 PM.