New Member RX-7 Technical Post your first technical questions here, in an easy flame free environment, before jumping into the main technical sections.

89 vert turbo 2 swap not idling

Thread Tools
 
Search this Thread
 
Old Jul 20, 2013 | 04:41 PM
  #1  
DubsHasReturned's Avatar
Thread Starter
Junior Member
 
Joined: Jun 2013
Posts: 11
Likes: 0
From: pa
89 vert turbo 2 swap not idling

Hey everyone. I picked up this car and was sitting for about 6 months. I replaced the fuel pump because it was shot. It is a turbo 2 swapped vert. It was sitting for about 6 month and needed a new fuel pump. I put in a walboro 255.

The car starts up but doesnt idle and just dies out. It will run if I give it some gas but once I stop it dies out. I was also having the two beeps after it stalls out and before I try to start it I had three beeps. All while I had my buckle not plugged in.

Last edited by misterstyx69; Jul 20, 2013 at 11:26 PM. Reason: added more info from another dupe thread.
Reply
Old Jul 21, 2013 | 08:26 PM
  #2  
DubsHasReturned's Avatar
Thread Starter
Junior Member
 
Joined: Jun 2013
Posts: 11
Likes: 0
From: pa
PA

Here is some more info about the car, it is running a front mount with no vacuum line running to the BOV, is has a 2 boost controllers, electric fan, and emissions removed. The previous owner said the car would stall out right away since emissions were removed until the car warmed up. I tried to adjust the BOC valve, but it didn't look like there is a screw in it. I took a picture of it.

Reply
Old Jul 25, 2013 | 10:38 AM
  #3  
DubsHasReturned's Avatar
Thread Starter
Junior Member
 
Joined: Jun 2013
Posts: 11
Likes: 0
From: pa
Still not having luck. I cleaned the afm out, and still not having any luck getting it to idle. Anyone have any ideas?
Reply
Old Jul 25, 2013 | 08:41 PM
  #4  
wthdidusay82's Avatar
Rotary Power
Tenured Member 15 Years
iTrader: (15)
 
Joined: Sep 2004
Posts: 3,706
Likes: 4
From: Dinwiddie, Va
do diagnostic tests on all your sensors and ecu with a multi meter, something may not be operating

Rotary > Pistons
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
trickster
2nd Generation Specific (1986-1992)
25
Jul 1, 2023 04:40 PM
bb6guy
Old School and Other Rotary
10
Oct 1, 2018 08:07 AM
josef 91 vert
2nd Generation Specific (1986-1992)
23
Sep 3, 2015 11:20 AM
pzr2
General Rotary Tech Support
1
Aug 15, 2015 08:29 PM
bb6guy
3rd Generation Specific (1993-2002)
3
Aug 12, 2015 03:29 PM




All times are GMT -5. The time now is 07:48 PM.