New Member RX-7 Technical Post your first technical questions here, in an easy flame free environment, before jumping into the main technical sections.

88 SE cooling issues

Old Oct 11, 2013 | 09:10 AM
  #1  
CoryMStewRX7's Avatar
Thread Starter
Junior Member
 
Joined: Jun 2012
Posts: 22
Likes: 0
From: Baltimore Md
MD 88 SE cooling issues

Im running into cooling issues in my car. The temp gauge rises to about half way at random which from what i understand isnt good for s4s. Also on cold start up and sometimes the Coolant light and buzzer comes on with a full rad. I replaced all the belts and the air pump belt gave me the most headache. id tension it and it would come loose( the belt not the tensioner position ). Now the belt is is loose and i can here the airpump squeel on start up.. Ive been thinking of doing the airpump delete but will this solve both my issue? im getting the yoohoo belt and block off plate. i figured it would give my waterpump its full contact.
Reply
Old Oct 11, 2013 | 02:06 PM
  #2  
CoryMStewRX7's Avatar
Thread Starter
Junior Member
 
Joined: Jun 2012
Posts: 22
Likes: 0
From: Baltimore Md
BUMP! anyone??
Reply
Old Oct 11, 2013 | 03:17 PM
  #3  
Rotaryhaven's Avatar
Total Rotary Domination!
Tenured Member 15 Years
iTrader: (17)
 
Joined: Apr 2002
Posts: 1,916
Likes: 1
From: Hampton, Virginia
that can be a lot of things... it can be a thermostat, a clogged radiator, or a heater hose/coolant hose that has a crack and is leaking coolant. The worst thing which I hope you don't have is a coolant seal that went out on your engine requiring a full rebuild....
Reply
Old Oct 12, 2013 | 01:04 PM
  #4  
CoryMStewRX7's Avatar
Thread Starter
Junior Member
 
Joined: Jun 2012
Posts: 22
Likes: 0
From: Baltimore Md
The car doesnt leak nor does it blow smoke. I did the champagne test and no bubbles.
Reply
Old Oct 12, 2013 | 01:09 PM
  #5  
CoryMStewRX7's Avatar
Thread Starter
Junior Member
 
Joined: Jun 2012
Posts: 22
Likes: 0
From: Baltimore Md
I usually didnt get on the high way in my car but just did and the temp stayed at about 1/3 not half at all.
Reply
Old Oct 12, 2013 | 11:14 PM
  #6  
CoryMStewRX7's Avatar
Thread Starter
Junior Member
 
Joined: Jun 2012
Posts: 22
Likes: 0
From: Baltimore Md
Burped the system and the light went away but the gauge creeps to about half. I was thinking that belt would hopefully give me peace and quiet.
Reply
Old Oct 13, 2013 | 12:49 AM
  #7  
Evil Aviator's Avatar
Rotorhead
Tenured Member 15 Years
 
Joined: Feb 2001
Posts: 9,136
Likes: 39
From: Charlottesville, Virginia, USA
If the gauge moves "at random" then it sounds like the gauge or sender is bad. The gauge should not move until the engine warms up.
Reply
Old Oct 13, 2013 | 08:55 AM
  #8  
roTAR needz fundZ
Tenured Member 15 Years
iTrader: (1)
 
Joined: Aug 2002
Posts: 2,614
Likes: 31
From: Freeland, MI
Your clutch fan may not be working properly also...if you have the stock fan that is
Reply
Old Oct 14, 2013 | 12:40 PM
  #9  
CoryMStewRX7's Avatar
Thread Starter
Junior Member
 
Joined: Jun 2012
Posts: 22
Likes: 0
From: Baltimore Md
Im thinking the water pump. On start up and at low speeds I can here a grinding/whinng sound I had a friend start it up and thats where that sound came from
Reply
Old Oct 14, 2013 | 03:43 PM
  #10  
CoryMStewRX7's Avatar
Thread Starter
Junior Member
 
Joined: Jun 2012
Posts: 22
Likes: 0
From: Baltimore Md
and i also have fan clutch problems with a previous car it was much more evident seeing as though it just over heated while in a parking spot... this car cools down if it sits. from like 1/3 to 1/4
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
rgordon1979
3rd Generation Specific (1993-2002)
40
Mar 15, 2022 12:04 PM
Ian_D
Single Turbo RX-7's
25
Oct 14, 2015 12:31 PM
<<Ayrton>>
Interior / Exterior / Audio
0
Sep 5, 2015 09:38 PM
ZaqAtaq
New Member RX-7 Technical
2
Sep 5, 2015 08:57 PM
Steven_McKinley
General Rotary Tech Support
12
Sep 5, 2015 10:48 AM


Thread Tools
Search this Thread

All times are GMT -5. The time now is 05:26 PM.