88 convertable rx7
04-14-09, 07:06 PM
#1
Can Post Only in New Member Section
Thread Starter
Join Date: Mar 2009
Location: Somerset, KY
Posts: 4
Likes: 0
Received 0 Likes
on
0 Posts
88 convertable rx7
I have an 88 convertable and it's an automatic I'm trying to find an 88-91 tranny cause the tranny I have came out of an 87 and all the wires and plugs are different and I can figure them out. Anyone want to help?
04-15-09, 10:16 AM
#3
Can Post Only in New Member Section
Thread Starter
Join Date: Mar 2009
Location: Somerset, KY
Posts: 4
Likes: 0
Received 0 Likes
on
0 Posts
I got the wiring diagrams but none of the plugs nore colored wires match up. According to the diagrams they do, but not phisically
Last edited by MATTJ360; 04-15-09 at 10:22 AM.
04-15-09, 11:26 AM
#4
The new transmission is an auto too, right? If that's the case, all of the switches on the trans will be the same. There are no wiring changes within the same series.
If the plugs and wire colors are different, then it'll be because someone changed them. You'll have to just make sure the plugs on your engine harness get matched with the appropriate switch on the transmission. Compare with your old trans, and wire them up properly.
If the plugs and wire colors are different, then it'll be because someone changed them. You'll have to just make sure the plugs on your engine harness get matched with the appropriate switch on the transmission. Compare with your old trans, and wire them up properly.
Thread
Thread Starter
Forum
Replies
Last Post