New Member RX-7 Technical Post your first technical questions here, in an easy flame free environment, before jumping into the main technical sections.

87 Mazda rx7 fc single turbo

Thread Tools
 
Search this Thread
 
Old May 5, 2015 | 08:20 PM
  #1  
Ekirby99's Avatar
Thread Starter
Can Post Only in New Member Section
 
Joined: May 2015
Posts: 1
Likes: 0
From: Chino
87 Mazda rx7 fc single turbo

Hi everyone, my name is Ed. I'm having trouble with my rx7. I just put a brand new intercooler and turbo on it and oil is spraying out of the exhaust as well as when I raise the rpms the oil comes out of the dip stick. It runs amazing and pulls hard. Any help would be great! Thanks
Reply
Old May 7, 2015 | 01:31 PM
  #2  
diabolical1's Avatar
Moderator
Tenured Member: 20 Years
Liked
Loved
Community Favorite
iTrader: (3)
 
Joined: Feb 2002
Posts: 10,998
Likes: 349
From: FL
welcome to the board.

it might help to post what turbo you have and any other parts/work you did/had done during this install. (restrictor, catch can, plumbing, etc.)
Reply
Old May 12, 2015 | 12:41 PM
  #3  
Akagis_white_comet's Avatar
Hey...Cut it out!
Tenured Member 15 Years
iTrader: (4)
 
Joined: Dec 2007
Posts: 2,067
Likes: 309
From: St Louis, MO
Originally Posted by diabolical1
welcome to the board.

it might help to post what turbo you have and any other parts/work you did/had done during this install. (restrictor, catch can, plumbing, etc.)
+1 here, it is hard to pin down a problem without the right information. But from a look as-is, it sounds like a horrendous amount of blow-by or a turbo that is puking oil due to worn out seals. Is your engine ported, such as with a Bridgeport?
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Turblown
Single Turbo RX-7's
0
Aug 14, 2015 04:48 PM




All times are GMT -5. The time now is 04:12 PM.