New Member RX-7 Technical Post your first technical questions here, in an easy flame free environment, before jumping into the main technical sections.

4k rpm then bogs in each gear help me!

Old Jul 4, 2010 | 03:50 PM
  #1  
racerlinkfd's Avatar
Thread Starter
Junior Member
 
Joined: Jul 2010
Posts: 15
Likes: 0
From: palmdale
Unhappy 4k rpm then bogs in each gear help me!

i have a 2nd gen rx7 with all emissions completely gone . i have swapped out and replaced fuel filters changed the oil spark plugs and serviced the tranny as well . heres my dilemma i started to notice that anytime i get to 4k rpm in any gear the car completely loses power and bogs down like it stumbles all over the place drives fine leading up to 4k then just bogs in every gear in neutral it revs just fine i really need help with this issues friend told me to swap ecu's did that didnt help another friend told me the harness needs to be changed out maybe not sending a signal to the injectors .if anyone knows or has a general idea please please help out a fellow brother out thanks
Reply
Old Jul 4, 2010 | 09:47 PM
  #2  
RotaryRocket88's Avatar
Top Down, Boost Up
Tenured Member 10 Years
iTrader: (7)
 
Joined: Mar 2008
Posts: 8,718
Likes: 6
From: San Diego, CA
Provide some more information. Year and model to start. If this is an S5 car, look up "limp mode."
Reply
Old Jul 15, 2010 | 04:01 PM
  #3  
racerlinkfd's Avatar
Thread Starter
Junior Member
 
Joined: Jul 2010
Posts: 15
Likes: 0
From: palmdale
more info on the car

Originally Posted by RotaryRocket88
Provide some more information. Year and model to start. If this is an S5 car, look up "limp mode."
the car is a 88 s4 na rx7
full emissions removed
straight back exhaust no cats
i believe it may be the wiring harness not sending a signal to the secondaries is there a way i can check that i have also checked and cleaned all the grounds and have checked all the fuses to make sure those werent the culprits just keeps bogging out at 4k rpm cleaned replaced and still no fix someone please offer some help
Reply
Old Jul 15, 2010 | 04:51 PM
  #4  
satch's Avatar
Moderator
Tenured Member: 20 Years
iTrader: (1)
 
Joined: Jun 2005
Posts: 11,738
Likes: 16
From: tulsa,ok.
Originally Posted by racerlinkfd
the car is a 88 s4 na rx7
full emissions removed
straight back exhaust no cats
i believe it may be the wiring harness not sending a signal to the secondaries is there a way i can check that i have also checked and cleaned all the grounds and have checked all the fuses to make sure those werent the culprits just keeps bogging out at 4k rpm cleaned replaced and still no fix someone please offer some help
Your other thread.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
rgordon1979
3rd Generation Specific (1993-2002)
40
Mar 15, 2022 12:04 PM
24seven_dada
3rd Generation Specific (1993-2002)
20
Nov 10, 2018 12:03 PM
Jeff20B
1st Generation Specific (1979-1985)
73
Sep 16, 2018 07:16 PM
The1Sun
1st Generation Specific (1979-1985)
7
Sep 18, 2015 07:13 PM
The1Sun
New Member RX-7 Technical
5
Sep 15, 2015 04:45 PM


Thread Tools
Search this Thread

All times are GMT -5. The time now is 12:19 AM.