1987 FC 4 to 5 lug conversion
08-01-18, 09:42 AM
#1
Professional Lurker
Thread Starter
1987 FC 4 to 5 lug conversion
I currently have my Rx7 sitting on some stands with the wheels off ready for some brake upgrades. I was planning on swapping my front calipers with some of the 4 piston calipers from a TII or an FD, then I learned that to do the the swap I would need to convert to 5 lugs or get some 5 lug rotors machined to fit 4 lugs. I was going to do a 5 lug swap eventually so I guess eventually will be now. My question is can I use my current spindles with the 5 lug hubs or will I need to use the TII spindles as well?
08-01-18, 11:04 AM
#2
Senior Member
I currently have my Rx7 sitting on some stands with the wheels off ready for some brake upgrades. I was planning on swapping my front calipers with some of the 4 piston calipers from a TII or an FD, then I learned that to do the the swap I would need to convert to 5 lugs or get some 5 lug rotors machined to fit 4 lugs. I was going to do a 5 lug swap eventually so I guess eventually will be now. My question is can I use my current spindles with the 5 lug hubs or will I need to use the TII spindles as well?
Thread
Thread Starter
Forum
Replies
Last Post
musicman3x
2nd Generation Specific (1986-1992)
2
01-22-07 08:40 AM
forced inducted fd dude
Suspension/Wheels/Tires/Brakes
3
09-14-06 04:31 PM
WannaSeeMyWankel
2nd Generation Specific (1986-1992)
6
11-30-04 04:02 PM
Kreb
2nd Generation Specific (1986-1992)
4
11-19-02 04:31 PM