Iv looked on the search but I cant seem to find the information I need, I have all the parts needed to do the swap so all I wanted to know is, is there a thread or a how to on doing the swap? like what wires I need to splice into from my ignition and all that ?

 

Been covered. Do a search in the 1st gen section and archive with the terms 13b swap and you should find answers.

Do not start more threads on this. If you find a thread with information but have more questions then bump up that thread so that we can add to it.

 

yeah Iv seen you post other posts like this thanks Doc I wasnt using the search right

 

I don't want to post any more because there are tons of topics on this engine swap and when I do post I get told to use the search which doesn't seem to help me find the answer to my questions

Mainly i keep finding T2 swaps on the search and advance searching I dont know if the harness is the same (I doubt it is) and I cant find the information I need for the s4 n/a swap for the electrical part so if any one has done this swap please pm me I just have a few questions for you so i don't hassle the boards to find answers

 

You mean this thread which is the very 1st one listed in the archives. :-)


https://www.rx7club.com/1st-gen-archive-71/engine-documented-ecu-pinout-cut-list-13b-swap-820328/