guzinta

Hi I'm new here.

I bought a "complete" 13b. It came with ecu,trans,clutch and all other parts for a complete package......less coils and igniters.
Two months have passed and no help is to be had from the vendor. Can anyone take a pic so I can see how they are to be mounted and wired? I have ordered coils and ingniters on ebay but the connecters dont seem to have a mating plug on the engine.
I've lost the summer and would be greatful for any help.
Thanks in advance.

misterstyx69

iTrader: (142)

the plug is on another harness on the driver's side.it will also have the Cas ans the alternator wire and the battery cables,starter wires,.and more,i just can't think of...look it up in the FSM online.

guzinta

Thanks I'll try that and see if there is a jumper harness from coils to main harness........no plugs match

guzinta

The FSM and parts drawings that I have found are not as good as one would expect. The igniters/coils look the same as the parts drawing.......
A friend of mine knows a mazda service tech and he's going to have a look at it.
I'll take pics and post them when my count gets high enough.