Richmond VA RX-7 Owners
#3351
Rotary Enthusiast
Join Date: Sep 2002
Location: Richmond, VA
Posts: 1,123
Likes: 0
Received 0 Likes
on
0 Posts
Congrads home slice!
You are right, this thread is dying. For all the talk of gathering, we never do it. Sometimes I look in envy at the get togethers the other NE guys have.
You are right, this thread is dying. For all the talk of gathering, we never do it. Sometimes I look in envy at the get togethers the other NE guys have.
#3353
Rotary Enthusiast
Join Date: Sep 2002
Location: Richmond, VA
Posts: 1,123
Likes: 0
Received 0 Likes
on
0 Posts
Is there some reason your car would not pass inspection?
I know a few places in town that inspect a little less 'complete' than others. If need be, I can hook you up with some names.
As far as springs, I'm sure any shop would do the install for you - but why? You can rent a spring compressor from Autozone for free and spend a day on it wrenching in the driveway.
I know a few places in town that inspect a little less 'complete' than others. If need be, I can hook you up with some names.
As far as springs, I'm sure any shop would do the install for you - but why? You can rent a spring compressor from Autozone for free and spend a day on it wrenching in the driveway.
#3357
Rotary Enthusiast
#3360
Rotary Enthusiast
Join Date: Sep 2002
Location: Richmond, VA
Posts: 1,123
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by ShogunOfHarlem
Thanks for the info I will call up auto zone. I have replaced springs before but that was in a full fledged shop while in the military.
Thanks,
Shogun
Thanks,
Shogun
-Jayson
#3361
i say what i want
Join Date: Aug 2002
Location: richmond, va
Posts: 1,866
Likes: 0
Received 0 Likes
on
0 Posts
if you can wait till next saturday, we can do it at my work, i may be able to get you an inspection sticker as well as long as its looks like it passes. (all lights work, no cracks in windshield, tires are decent, ect.)
#3365
i say what i want
Join Date: Aug 2002
Location: richmond, va
Posts: 1,866
Likes: 0
Received 0 Likes
on
0 Posts
vmsc.org has the schedule and all the dates.
so anyone good with tax laws and ****? i hate to just post my personal problems all over the place, but im wondering if i have this straight and if anyone else has any more info on this.
https://www.rx7club.com/showthread.p...=1#post4154298
it blows for me, but learned alot about taxes and **** today. (yes, i spent most of my day in a library when it was that nice outside... go figure). im pretty sure it will work out for me in the long run, but anyone have any input on this?
so anyone good with tax laws and ****? i hate to just post my personal problems all over the place, but im wondering if i have this straight and if anyone else has any more info on this.
https://www.rx7club.com/showthread.p...=1#post4154298
it blows for me, but learned alot about taxes and **** today. (yes, i spent most of my day in a library when it was that nice outside... go figure). im pretty sure it will work out for me in the long run, but anyone have any input on this?
#3366
Senior Member
Join Date: Mar 2001
Location: dinwiddie VA
Posts: 652
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by onepointone
vmsc.org has the schedule and all the dates.
so anyone good with tax laws and ****? i hate to just post my personal problems all over the place, but im wondering if i have this straight and if anyone else has any more info on this.
https://www.rx7club.com/showthread.p...=1#post4154298
it blows for me, but learned alot about taxes and **** today. (yes, i spent most of my day in a library when it was that nice outside... go figure). im pretty sure it will work out for me in the long run, but anyone have any input on this?
so anyone good with tax laws and ****? i hate to just post my personal problems all over the place, but im wondering if i have this straight and if anyone else has any more info on this.
https://www.rx7club.com/showthread.p...=1#post4154298
it blows for me, but learned alot about taxes and **** today. (yes, i spent most of my day in a library when it was that nice outside... go figure). im pretty sure it will work out for me in the long run, but anyone have any input on this?
#3367
Rotary Freak
iTrader: (1)
from the VMSC forum today ala Michael Barnes
"We are confirmed with ACCA Temple, and this is a MEMBERS ONLY event, for April 10. The address is:
ACCA Temple
1712 Bellevue Ave.
Richmond, Virginia 23235
First Car Off is 11, so registration closes at 10. Driver's meeting is 10:30. Plan accordingly. The Shriners are probably going to arrange to offer food, probably burgers, BBQ, drinks and chips. We will have use of the smaller building on the lawn again."
WOOHOO!!!
"We are confirmed with ACCA Temple, and this is a MEMBERS ONLY event, for April 10. The address is:
ACCA Temple
1712 Bellevue Ave.
Richmond, Virginia 23235
First Car Off is 11, so registration closes at 10. Driver's meeting is 10:30. Plan accordingly. The Shriners are probably going to arrange to offer food, probably burgers, BBQ, drinks and chips. We will have use of the smaller building on the lawn again."
WOOHOO!!!
#3368
Rotary Freak
iTrader: (1)
Originally Posted by onepointone
vmsc.org has the schedule and all the dates.
so anyone good with tax laws and ****? i hate to just post my personal problems all over the place, but im wondering if i have this straight and if anyone else has any more info on this.
https://www.rx7club.com/showthread.p...=1#post4154298
it blows for me, but learned alot about taxes and **** today. (yes, i spent most of my day in a library when it was that nice outside... go figure). im pretty sure it will work out for me in the long run, but anyone have any input on this?
so anyone good with tax laws and ****? i hate to just post my personal problems all over the place, but im wondering if i have this straight and if anyone else has any more info on this.
https://www.rx7club.com/showthread.p...=1#post4154298
it blows for me, but learned alot about taxes and **** today. (yes, i spent most of my day in a library when it was that nice outside... go figure). im pretty sure it will work out for me in the long run, but anyone have any input on this?
BTW still have that spare room available, I know it's further away than you want but I mention it just in case you really need to get out some point.
#3369
Senior Member
iTrader: (1)
Join Date: Dec 2004
Location: Chesterfield Va
Posts: 419
Likes: 0
Received 0 Likes
on
0 Posts
i have a question for you onepointone i was wondering if there is any way that i could get you to help me put a engine into my 86 gxl or if any one of you richmond guys could help
#3371
Rotary Enthusiast
Join Date: Sep 2002
Location: Richmond, VA
Posts: 1,123
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by niburu
from the VMSC forum today ala Michael Barnes
"We are confirmed with ACCA Temple, and this is a MEMBERS ONLY event, for April 10. The address is:
ACCA Temple
1712 Bellevue Ave.
Richmond, Virginia 23235
First Car Off is 11, so registration closes at 10. Driver's meeting is 10:30. Plan accordingly. The Shriners are probably going to arrange to offer food, probably burgers, BBQ, drinks and chips. We will have use of the smaller building on the lawn again."
WOOHOO!!!
"We are confirmed with ACCA Temple, and this is a MEMBERS ONLY event, for April 10. The address is:
ACCA Temple
1712 Bellevue Ave.
Richmond, Virginia 23235
First Car Off is 11, so registration closes at 10. Driver's meeting is 10:30. Plan accordingly. The Shriners are probably going to arrange to offer food, probably burgers, BBQ, drinks and chips. We will have use of the smaller building on the lawn again."
WOOHOO!!!
nice! we talked about that at the monthly meeting.
who wants to drift one of the acca go-karts?!?!?!
#3372
Rotary Freak
iTrader: (1)
Originally Posted by cafcwest
nice! we talked about that at the monthly meeting.
who wants to drift one of the acca go-karts?!?!?!
who wants to drift one of the acca go-karts?!?!?!
They should get the best ACCA driver out there, it wouldn't even be a tight course to a go kart. I remember last year, 2 laps in like 45 sec. I beat the hell out of my tires too, squeeling the whole time and then I did 5 fun runs at the end since it was such a quick event, very unhappy Yoko's.
I have some friends that live over in the area they're just gonna walk over to watch. Finally my GF gets to see an autocross, I'm trying to get her to try it, she has a great car for autoX it's a supercharged Miata.
#3373
i say what i want
Join Date: Aug 2002
Location: richmond, va
Posts: 1,866
Likes: 0
Received 0 Likes
on
0 Posts
so the other day i was merging onto chippinham (spelled that wrong or...?) and i decided to open up my car alittle since i havent done so in a while. i rip it to redline (wasnt **** for the old motor), and decelerate down to 5.5k in third, put it in 5th and start cruising. i looked in my rear view mirror and at 80mph i could not see the car behind me because my car shot out so much blue smoke. ive NEVER had this happen to me before. im REALLY REALLY REALLY REALLY hoping its not an oil seal taking a **** on me. it held oil pressure, it doesnt smoke at idle, idles fine when warm (shes hates being cold). i did it again today and as soon as i hit redline more blue smoke came out, but not nearly as much.
i ran a can of BG MOA in my oil this oil change with some castrol gtx 20w40. (upped the weight for some oil pressure). also, im still using the stock oil metering system. with the other motor i was premixing my gas. im thinking about going back to premix. anyone want to take a stab at what this could be?
looks like youll see me on the bike sunday . i was looking forward to autoxing.
i ran a can of BG MOA in my oil this oil change with some castrol gtx 20w40. (upped the weight for some oil pressure). also, im still using the stock oil metering system. with the other motor i was premixing my gas. im thinking about going back to premix. anyone want to take a stab at what this could be?
looks like youll see me on the bike sunday . i was looking forward to autoxing.
#3374
Rotary Freak
iTrader: (1)
I've had mine do it twice when I didn't let warm up, went up a small incline and left a cloud down the street- my neighbors must love me, last year it was the obnoxiously loud Karmann Ghia this year it's old smokey
oh
and my starter went yesterday with no warning
it spins like a **** but no teeth left to engage the flywheel
oh
and my starter went yesterday with no warning
it spins like a **** but no teeth left to engage the flywheel
#3375
i say what i want
Join Date: Aug 2002
Location: richmond, va
Posts: 1,866
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by niburu
it spins like a **** but no teeth left to engage the flywheel
it could be the starter gear not getting pushed forward when its actuated.