Richmond VA RX-7 Owners
#2576
Rotary Freak
iTrader: (1)
well I am now officially a RX7 owner.
About a 1/4mile from my house the logicon lights up everything.
crap
look at guages everythings ok
100 feet from the driveway I get a shot of steam from the hood
crap crap
coast into the driveway, check guages temp guage is at 3/4
shut the car down and flip the hood open
the alternator belt is broken and the water pump belt is off
I thought all the belts were new but appparently the alternator belt wasn't
guess I'll need to get a repair manual
it's dried and cracked on further inspection on whats left of it
About a 1/4mile from my house the logicon lights up everything.
crap
look at guages everythings ok
100 feet from the driveway I get a shot of steam from the hood
crap crap
coast into the driveway, check guages temp guage is at 3/4
shut the car down and flip the hood open
the alternator belt is broken and the water pump belt is off
I thought all the belts were new but appparently the alternator belt wasn't
guess I'll need to get a repair manual
it's dried and cracked on further inspection on whats left of it
#2580
Rotary Enthusiast
Join Date: Sep 2002
Location: Richmond, VA
Posts: 1,123
Likes: 0
Received 0 Likes
on
0 Posts
Dude, Sunday when me and Joe where over John's house and all you and Mike did was go 'bike this, bike that', I just wanted to through a rotor housing at you or something. Come up and see us sometime damnit!
#2582
bikebikebikebikebikebikebikebikebikebikebikebikebi kebikebikebikebikebikebikebikebikebikebikebikebike bikebikebikebikebikebikebikebikebikebikebikebikebi kebikebikebikebikebikebikebikebikebikebikebikebike bikebikebikebikebikebikebikebikebikebikebikebikebi kebikebikebikebikebikebikebikebikebikebikebikebike bikebikebikebikebikebikebikebikebikebikebikebikebi kebikebikebikebikebikebikebikebikebikebikebikebike bikebikebikebikebikebikebikebikebikebikebikebikebi kebikebikebikebikebikebikebikebikebikebikebikebike bikebikebikebikebikebikebikebike
#2583
FTD Wanna Be
Thread Starter
Join Date: Jun 2002
Location: Virginia
Posts: 1,252
Likes: 0
Received 0 Likes
on
0 Posts
rx7rx7rx7rx7rx7rx7rx7rx7rx7rx7rx7rx7rx7rx7rx7rx7rx 7rx7rx7rx7rx7rx7rx7rx7rx7rx7rx7rx7rx7rx7rx7rx7rx7r x7rx7rx7rx7rx7rx7rx7rx7rx7rx7rx7rx7rx7rx7rx7rx7rx7 rx7rx7rx7rx7rx7rx7rx7rx7rx7rx7rx7rx7rx7rx7rx7rx7rx 7rx7rx7rx7rx7rx7rx7rx7rx7rx7rx7rx7rx7rx7rx7rx7rx7r x7rx7rx7rx7rx7rx7rx7rx7rx7rx7rx7rx7rx7rx7rx7
#2584
FTD Wanna Be
Thread Starter
Join Date: Jun 2002
Location: Virginia
Posts: 1,252
Likes: 0
Received 0 Likes
on
0 Posts
Looks like the drift event was fun in the rain.
I picked up the GTU this weekend. To my surprise, it runs and it's not in bad shape at all. I pulled the spare motor apart and everything is junk except for 1 rotor housing, so that kinda sucks. Should be a fun project!
I picked up the GTU this weekend. To my surprise, it runs and it's not in bad shape at all. I pulled the spare motor apart and everything is junk except for 1 rotor housing, so that kinda sucks. Should be a fun project!
#2588
FTD Wanna Be
Thread Starter
Join Date: Jun 2002
Location: Virginia
Posts: 1,252
Likes: 0
Received 0 Likes
on
0 Posts
I need a few parts, can anyone help me out? I don't feel like going to CAP, because when I do they see me coming and get rid of all the 2nd gen RX-7s:
Drivers side FTP
Radio Surround
Drivers side door trim
Drivers side FTP
Radio Surround
Drivers side door trim
#2589
Rotary Freak
iTrader: (1)
the belt for the P/S pump doesn't fit right, friggin autozone
I'm going to go to NAPA for the last belt (where all the old belts are from)
I am 99% sure I am running the rex at the sept 26 AutoX @ VMP
for the sept 19th event out in Verona (BRRSCCA) I'm going to run the Ghia
my parents bought a place out in Stuarts Draft back in January (15 minutes away from Verona) they have a really nice workshop/garage, it's 900 sqft
my sway bars for the ghia finally arrived so that should tighten up the cornering nicely
I'm going to go to NAPA for the last belt (where all the old belts are from)
I am 99% sure I am running the rex at the sept 26 AutoX @ VMP
for the sept 19th event out in Verona (BRRSCCA) I'm going to run the Ghia
my parents bought a place out in Stuarts Draft back in January (15 minutes away from Verona) they have a really nice workshop/garage, it's 900 sqft
my sway bars for the ghia finally arrived so that should tighten up the cornering nicely
#2590
Rotary Freak
iTrader: (1)
Hey Zach,
I just remebered, I still have the original radio/cassete deck from the rex does it have the stereo surround you need or is that a seperate component? (noob question I know but well hey I am noob to these cars) You can have if it's watcha need, I had a new sony cd player put in the first week I had the car.
I just remebered, I still have the original radio/cassete deck from the rex does it have the stereo surround you need or is that a seperate component? (noob question I know but well hey I am noob to these cars) You can have if it's watcha need, I had a new sony cd player put in the first week I had the car.
#2592
FTD Wanna Be
Thread Starter
Join Date: Jun 2002
Location: Virginia
Posts: 1,252
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by niburu
Hey Zach,
I just remebered, I still have the original radio/cassete deck from the rex does it have the stereo surround you need or is that a seperate component? (noob question I know but well hey I am noob to these cars) You can have if it's watcha need, I had a new sony cd player put in the first week I had the car.
I just remebered, I still have the original radio/cassete deck from the rex does it have the stereo surround you need or is that a seperate component? (noob question I know but well hey I am noob to these cars) You can have if it's watcha need, I had a new sony cd player put in the first week I had the car.
#2593
Rotary Freak
iTrader: (1)
ok thats whats meant by the stereo surround, stereo was working when I had it taken out, and looks to be in good shape, it's all yours (glad I didn't chuck it) and got the belts back on at lunch today, put in a 1/2 gallon of coolant, and runs just fine. Tonight I double check the belt tensions.
#2597
Rotary Freak
iTrader: (1)
what a f'n week, my phonline has been down (no dialtone) since monday and they said it'll be next monday before they can get a tech out there, so that means no DSL at the house either DAMMIT!!! thank god I at least have a working cell phone on the bright side of it no telemarketers for a week
#2599
FTD Wanna Be
Thread Starter
Join Date: Jun 2002
Location: Virginia
Posts: 1,252
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by REXVa7
Looks like I might be staying in this club alittle longer. Compression tests came out fine!!!!!!
Maybe it truly is the map sensor. But the darn thing doesnt even rev.
Maybe it truly is the map sensor. But the darn thing doesnt even rev.