s5 aux ports not working
#1
Junior Member
Thread Starter
Join Date: Nov 2007
Location: Wilbraham MA
Posts: 44
Likes: 0
Received 0 Likes
on
0 Posts
s5 aux ports not working
so i have an 89 gxl that i just installed the atkins sleeves for the 6port cause there was no sleeves in it when i bought it. the problem is that they still dont work and my vdi doesnt work either. i found out that the car used to be auto and is now manual and the clutch switch and neutral safety switch isnt connected. do these need to be connected and if so how do i wire them to an auto body harness
#4
Junior Member
iTrader: (2)
Join Date: Aug 2009
Location: Denver
Posts: 32
Likes: 0
Received 0 Likes
on
0 Posts
Bypass the solenoids' vacuum lines like so..
Have someone start the engine and rev it a bit. By about 2-3000 the pressure should be up to opening at least the 6pi acutators. If not, you have an air leak/airpump not working/actuators broken (not in that order of likelihood, lol). If they do actuate, then the solenoid isn't opening properly and you're on the electrical path.
Easy stuff first
Have someone start the engine and rev it a bit. By about 2-3000 the pressure should be up to opening at least the 6pi acutators. If not, you have an air leak/airpump not working/actuators broken (not in that order of likelihood, lol). If they do actuate, then the solenoid isn't opening properly and you're on the electrical path.
Easy stuff first
Thread
Thread Starter
Forum
Replies
Last Post