Hi,
I need to replace my entire brake system for my FD (stock) and tune up (check engine and comporession). Can anyone recommend a good tuning shop in Colorado Springs area and what kind of brake sets (rotor, pads) should I get? Thanks beforehand

 

If you see anything you like on RX7.com or RX7store.net let me know and I will get you a price. I am a dealer for both. As far as a shop in the springs...I would recommend Revolutions Tuning. Talk to Servion. Sorry don't have number....but you can PM Servion on ColoradoRacing.net

 

Thank you Sir...as far as parts I will PM you.

 

Code3, I don't see that you have signed up on this list. Also, make sure you sign up on the yahoo group....the link is in this thread...

https://www.rx7club.com/mountain-rx-7-forum-144/list-known-colorado-owners-544601/

 

Thanks, signed up.

 

Once I checked, it turned out that my brake system is fine. I do have a bigger problem though, I have a coolant seal problem (boiling water nioise after car shut off) and oil leak from my turbo.

I tried to call Servion (Rev Tuning) twice and yet to recieve any call back. Is there ANY tuning shop in Colorado Springs that can fix these problems, help needed asap. I do not want my car to sit at home unfix. Thanks in advance!

 

If your willing to come to Denver to have it tuned....give me a call. 303-929-1998....I have a couple of people you to talk to.

Mike B

 

Thanks Mike,
I will tyr to replace the AST cap first and see if this will fix the problem. I had my engine light on yesterday but I had the car sitting outside on 10deg weather for hours, unsure if the weatehr caused that (on or not). I did not have my check engine light on today (just try to start them but not drive it).

I will try to drive it today and see if the engine light came on, and most probably dan tow it or drive it to Denver. I will contact you once I make my decision, most probably going to be next Tuesday (my days off). Thanks again for your help, Sir!

 

Mike,
No luck in finding any tuning shop that could tell me what happened to my FD here in Colo Spgs, I might have to just tow it to Denver and have them check everything. Could you recommend anyone in Denver area that could help me fix all my FD problems. If you could recommend anyone that is reasonable in price since I have a lot of things to fix (I guess) on this one. Please PM me otherwise I can call you and speak with you, thanks again!

 

Code 3,

My name is Mark and I work at Precision Import Repair in Denver (on the south side). We specialize in RX-7's and if there is anything we can do for you let us know!! Mike B can tell you about us if you have any questions.

Thanks,

Mark Mauro
Precision Import Repair
303-797-6510

 

He is correct....Precision Import Repair is where I take my own car when it's something I can't do with the help of a friend. Now that Mark is working there, it only makes them better! He must have had to hire you (Mark) with all the Rotary business I have sent in the past year!

 

The best way to get a hold of servion is through here. http://www.hondaracingcrew.com/phpBB2/ PM him there. It is almost imposible to get him on the phone but either text him on his cel phone or pm works really good. If I can help you on anything let me know.

 

Thanks for the compliment and all the business Mike!!!

Mark

 

Mark, when you guys slow down, let me know......I need to get my car back up and running and we can't figure it out......The only other idea we haven't tried is to replace the GM 3 bar map sensor. Do you think this would cause the car to die at idle?

 

Hey mike,

I will talk to Mike M. about your issue. Contact us or I'll contact you in a week or two when we slow down a bit and the snow melts!!!


See yah, happy holidays

Mark

 

Thanks for the info guys, I have been very busy with work as well and with all these snow here....there is no way I am ablt to move the car anywhere. I appreciate everyone's help though. When is the next meet, if there is any?

 

I will post a date for the next meet sometime in March. The meet will be most likely late March or April depending on weather and road conditions. I haven't worked out a location yet, but will look into it in a couple months....If anyone has any idea's let me know.