For Colorado owners

Just bought and installed a GReddy Profec B Spec II, and praying that someone knows the set-up percentages for 10psi. I know I have to play with it but would feel more comfortable if someone can give a baseline on where to start or even better the exact numbers. My mods are cb, hi-flo cat, dp, intake, intercooler, stock twins sequential. Any info on the subject would be great. Thanks

 

Start everything at 10% and work your way up. The boost controller setup will be different for your car vs everyone else's.

B

 

minus the CB, you have the same mods as me. Do you have a PFC? Where you at in CO? BDC, do you get a lot of FD's with creep or spikes after installing the PFC? I bet that all gets fixed when tuning properly? I have a MBC, but not hooked up. I experienced a bit of a spike or creep, not sure which one? that was before I bought the PFC and MBC, I was going to hook the PFC up first and see if I even need the MBC? When you get out here BDC I am hoping to have that all figured out.

 

last time i did mine i had a lot less mods...i think i ended up with somewhere between 3-5 for the gain and like 37 for the duty cycle.
but its easy as hell to set up so just do it! just start low

 

I live real close to you, Firestone. About 30min from Ft.Collins. I don't have a PFC, lacking the funds. From what I hear, boost controllers only eliminate boost spike. The PFC I'm not sure of, it will eliminate boost spike for sure but boost creep I don't know. I asked the same question a year ago and got a response saying if you have a mp, the only way to get rid of boost creep is porting your wastegate. I got a hi-flow cat for that reason but I think I'm still getting some creep. I guess if the PFC doesn't get rid of creep, than I'm stuck with porting the wastegate.

 

Sweet, we need to hook up sometime soon. Pm me anytime. I was told the same thing about the boost creep and spike situation. The thing that I am banking on is that Dr Wankel(aka Dane) had stock twins, HF cat, CB, and PFC and had no issues with boost creep and/or spikes. He claimed that it was holding boost just fine and no need for a BC. So we will see what happens. I have a new HF cat and PFC in the box ready to be installed. I don't want to be driving too far or much on the base map when I do put in the PFC, so hopefully by the time I am done, BDC will be here to tune it up. Yes. I am so glad I am going to have it tuned properly. Nyteryder, get a hold of me sometime. Hopefully we can cruise and see what is up soon. It was hot today, summer is coming!