Your local Rotary shop
Junior Member
Joined: Apr 2013
Posts: 13
Likes: 0
From: Chicago, US
Junior Member
Joined: Apr 2013
Posts: 13
Likes: 0
From: Chicago, US
Good Mechanic in Chicago who knows 1st Gen RX7
Any suggestions for a knowledgeable shop in the Chicagoland area?
My car is a 1983 GS with likely carb problem (stuck float). Car starts fine and runs, but clearly is getting too much fuel (black smoke and obvious gas smell) and will bog out unless driven extremely gingerly. I'm hesitant to jump into it myself for fear of worsening the situation.
I searched the forums on this site and the two links were more fabricator / racing oriented shops. I just need a trustworthy tech with enough familiarity with these cars, sourcing parts, etc.
Thanks in advance.
My car is a 1983 GS with likely carb problem (stuck float). Car starts fine and runs, but clearly is getting too much fuel (black smoke and obvious gas smell) and will bog out unless driven extremely gingerly. I'm hesitant to jump into it myself for fear of worsening the situation.
I searched the forums on this site and the two links were more fabricator / racing oriented shops. I just need a trustworthy tech with enough familiarity with these cars, sourcing parts, etc.
Thanks in advance.
Joined: Jan 2005
Posts: 3,003
Likes: 1
From: From Lexington, Ky/ Live in Edmond, Ok
My Name is Louis Shearer
Richmond, Kentucky
859-200-4524 e-mail (drama196324@gmail.com)
Give me a call if your in Central Kentucky and have RX-7 & 8
troubles, I can do everything from Minor tune ups, to Engine building. Have been working on the Mazda`s since 1983. I have done many engine conversions from 13B rew`s into FC`s and 13B re`s into FB`s.
From old school to the Modern engine Management systems.
Thanks Mike a.k.a. viperx7
Richmond, Kentucky
859-200-4524 e-mail (drama196324@gmail.com)
Give me a call if your in Central Kentucky and have RX-7 & 8
troubles, I can do everything from Minor tune ups, to Engine building. Have been working on the Mazda`s since 1983. I have done many engine conversions from 13B rew`s into FC`s and 13B re`s into FB`s.
From old school to the Modern engine Management systems.
Thanks Mike a.k.a. viperx7
New e-mail louisshearer1@gmail.com
Check out the Rotary repair craigslist ad in the Lexington, Kentucky area.
Sick Automotive
Adaptronic dealer and also a borg warner dealer
Located in Council Bluffs IA
Home of the $1500 CORE REBUILD
402 319 2239
www.facebook.com/sickauto
Adaptronic dealer and also a borg warner dealer
Located in Council Bluffs IA
Home of the $1500 CORE REBUILD
402 319 2239
www.facebook.com/sickauto
Heads up to Indy folks, AIM Tuning in gasoline alley has closed their doors. I talked to the owner, he said business was great but he just wasn't enjoying the work anymore.
Though they downsized a few years back and weren't doing rotary work anymore anyway, just MX-5 stuff.
Though they downsized a few years back and weren't doing rotary work anymore anyway, just MX-5 stuff.
Sick Automotive
Owner: Matt Vincent
Number: 402 319 2239
Web site: sick-automotive.com
Social Network: www.facebook.com/sickauto
Owner: Matt Vincent
Number: 402 319 2239
Web site: sick-automotive.com
Social Network: www.facebook.com/sickauto
Joined: Jan 2005
Posts: 3,003
Likes: 1
From: From Lexington, Ky/ Live in Edmond, Ok
Accepting work once again, Finally caught up on some long projects, looking for anyone who needs rotary work on 7`s or 8`s.
Ring or text me at 859-779-8434
Or shoot me a question at louisshearer1@gmail.com
Thanks again Louis.
checkout Central Kentucky Rotary on Facebook...
Ring or text me at 859-779-8434
Or shoot me a question at louisshearer1@gmail.com
Thanks again Louis.
checkout Central Kentucky Rotary on Facebook...
Joined: Jan 2005
Posts: 3,003
Likes: 1
From: From Lexington, Ky/ Live in Edmond, Ok
Caught up again, need work to stay busy, central Kentucky folks come on over.
859-779-8434 or e-mail at louisshearer1@gmail.com
859-779-8434 or e-mail at louisshearer1@gmail.com
Junior Member
Joined: Apr 2013
Posts: 1
Likes: 0
From: Ankeny, IA
Rotors Performance
name: Matt Vincent, Rotors Performance
address: 2559 Avenue A, Council Bluffs, IA 51501
contact number/email: (402) 955-9660, info@rotorsmagazine.com
These guys did a full rebuild on my '94 FD after the coolant seal failed. They did a great job, including finding top quality, value priced used housings. I am not a mechanic, but I am an engineer and I know good work from a good outfit. Message me for a referral or visit Rotors Performance on FB.
Peter
address: 2559 Avenue A, Council Bluffs, IA 51501
contact number/email: (402) 955-9660, info@rotorsmagazine.com
These guys did a full rebuild on my '94 FD after the coolant seal failed. They did a great job, including finding top quality, value priced used housings. I am not a mechanic, but I am an engineer and I know good work from a good outfit. Message me for a referral or visit Rotors Performance on FB.
Peter
Can Post Only in New Member Section
Joined: Sep 2017
Posts: 1
Likes: 0
From: Tulsa Oklahoma
N
Hello
We are Rotary Resource Located in Tulsa OK.We only repair/rebuild/tune rotary motors 12A,13B,13BT,13BTT from
$1500 installed 12 day turn around time.We also have the largest supply of RX-7 parts inOKLAHOMA.We offer Customers a few differant types of apex seals to choose from however we prefer te atkins design.All motors have a 90day labor 1YEAR PARTS WARRANTY.
Thanks ROB
ROTARY RESOURCE@juno.com
11522 E 28TH ST TULSA OK
(918)280-8895
We are Rotary Resource Located in Tulsa OK.We only repair/rebuild/tune rotary motors 12A,13B,13BT,13BTT from
$1500 installed 12 day turn around time.We also have the largest supply of RX-7 parts inOKLAHOMA.We offer Customers a few differant types of apex seals to choose from however we prefer te atkins design.All motors have a 90day labor 1YEAR PARTS WARRANTY.
Thanks ROB
ROTARY RESOURCE@juno.com
11522 E 28TH ST TULSA OK
(918)280-8895
Hey Rob I'm looking for a good shop in Tulsa , are you still running a shop?
Shop to streetport 88 turboII
Shop name: Rotary Doctor
Location: Neosho, MO
Owner: Kyle Seaman
Phone: (417) 451-9661
Description: Small one mechanic shop with a good selection of parts cars. Kyle is one of the most knowledgable guys I've ever known. He has every nut and bolt memorized on RX-7's. Not to big on doing extensive modifications. But builds good motors, and does excellent repair work. He's a good guy that's supported rotaries since the early 70's. He deserves your support if you live in SW Missouri.
Location: Neosho, MO
Owner: Kyle Seaman
Phone: (417) 451-9661
Description: Small one mechanic shop with a good selection of parts cars. Kyle is one of the most knowledgable guys I've ever known. He has every nut and bolt memorized on RX-7's. Not to big on doing extensive modifications. But builds good motors, and does excellent repair work. He's a good guy that's supported rotaries since the early 70's. He deserves your support if you live in SW Missouri.
Newbie
Joined: Feb 2026
Posts: 3
Likes: 0
From: Fairfield, CT
Finding a reliable rotary shop is important since these engines need specialized knowledge and proper maintenance. It helps to work with technicians who understand rotary tuning, seals, and cooling requirements. I once heard a driver from Luxury Rides LLC mention that choosing the right shop can greatly extend engine life and performance.
Thread
Thread Starter
Forum
Replies
Last Post
