Rotornut

I have no time to do all these but can Davinci Motorworks do also all the inspections and replacements for wires, plugs, and fuel filter, the day before? For a fee of course. Anybody wants to get together for a group discount?

peko gonzalos

I'll talk to them tommorow, I don't see why they wouldn't be able to do this for you guys. I'll talk with them and shoot you guys a price. You would be bringing the plugs,wires and filter correct?

Rotornut

Yes. But they supply the material for the o2 bung. Whatever that is.

peko gonzalos

Yes, they can supply the bung and weld it in.

peko gonzalos

Hotel Information for those coming from out of town.

Ramada Ltd O Fallon Il
1320 Park Plaza Drive
Ofallon, IL 62269-1763
(618) 628-9700

They are located about 8 minutes from the shop.

Also, Ramada is next door to movie theatre, lone star, chevy's, chili's, o'charlies and emporors wok.

We'll need to decide where to eat that friday night.

TonyTurboII

Ive got new plugs in, theyre basically from some test and tune, but im going to get two extra sets anyway.

johnrxt2

what time r we going to start on saturdaY?

peko gonzalos

We've got an Advanced Auto close by, they carry plugs if anyone needs some last minute.

johnrxt2

Peko U Got Ur Motor Back Together

peko gonzalos

Waiting to hear back from Steve. It's up to him, I'd like to start first thing sat morning. So far, the order of tuning will go....

1. Me
2. jeepguy04 (coming from memphis)
3. rotornut ( coming from memphis)

My motor is built and on the engine stand. I just need to swap everything over and drop it in.

johnrxt2

as long i can make it on i doubt my car could get painted by then so i cant go on the street but ive got the whole day off so im not worried what time.

Irrigated_Onion

Just heard about the dyno tune as I was at DaVinci this morning. How long do you expect to be there on Sat/Sun? I drive a slow (but smooth) rx8 and would like to come see some of these monsters in person.

peko gonzalos

We'll be there for quite awhile. We'll most likely be going out saturday night if Steve's up to it

You're more than welcome to come with.

TonyTurboII

Whats the deal on the red 2nd gen at Davinci? Are they on the forum? What ECU is he running?

meddle

You know I am.

Kuntuh

jap spec motor w/ davinci's af61r turbo. I think that's what it's called. It also has a power fc and all kinds of goodies. That one should be getting tuned as well.

peko gonzalos

Updated tuning list as follows.


1. Lupe-------------------------(Paid)
2. jeepguy04------------------(paid)
3. rotornut---------------------(paid)
4. johnrxt2---------------------(paid)
5. Cowsniper------------------(paid)
6. Trex72-----------------------(paid)
7. TonyTurboII-----------------(paid)
8. Davinci orange 3rd gen---(paid)
9. Davinci red 2nd gen-------(paid)
10.Davinci silver 3rd gen-----(paid)
11.Books------------------------(paid)
12.Coolduke--------------------(waiting for payment)
--------------------------------------------------------------------------------------------------------------------------------------------
Dyno List:

1. Myself/Lupe
2. jeepguy04
3. rotornut
4. johnrxt2
5. cowsniper
6. trex72
7. TonyturboII
8. coolduke

If you see anything that needs to be changed, please let me know.
--------------------------------------------------------------------------------------------------------------------------------------------

Eveyone needs to make a checklist before Steve Kan arrives. This is what he said in an earlier post.

"Here're some items to inspect/replace before the dyno. New plugs (less than 1k miiles), new fuel filter (less than 5k miles), inspect spark plug wires, oil change, full tank of whatever gas you normally run, inspect tires (no nails or anything that can fly out during the dyno), inspect coolant fluid (change if necessary), clean air filter, put all the mods in that you plan to run before coming to the dyno (I don't think there'll be enough time to install them on the same day)."

--------------------------------------------------------------------------------------------------------------------------------------------

Hotel Information for those coming from out of town.

Ramada Ltd O Fallon Il
1320 Park Plaza Drive
Ofallon, IL 62269-1763
(618) 628-9700

They are located about 8 minutes from the shop.

peko gonzalos

I sent you a pm about this but I will post it here too.

Davinci will change your plugs, wires, fuel filter and weld in a 02 bung for $50. You will need to bring up the wires, plugs and fuel filter and they will supply the 02 bung.

This is special pricing now.

jeepguy04

iTrader: (1)

How much if we only want an O2 bung welded in? I have already taken care of the rest of the stuff. Well except the spark plugs but thanks to no ac and no power steering that is only a 2 minute job.

peko gonzalos

$25

You guys will need to be at Davinci at a decent time. They open at 10am. If you guys would like work done I'll also need to know so they can plan their day. Either pm me or post here.

TonyTurboII

Is the location of the bung on my downpipe ok, or too close to the turbo?

peko gonzalos

Wow, that's a huge bung you have

peko gonzalos

Dude, Davinci already painted your RX7. Looks fricken bad ***.

TonyTurboII

Its big enough for a probe, lol.

peko gonzalos

Steve Kan's flight arrives at 7:05pm friday evening. Anyone want to ride over with me to pick him up?

We're going to come back and do dinner. Anyone up for meeting friday evening for dinner/drink and whatever else?

Chevy's fresh mex?