New rotary shop in Pittsburg Kansas
#1
Eats, Sleeps, Dreams Rotary
Thread Starter
iTrader: (13)
Join Date: Aug 2002
Location: Pittsburg, KS.
Posts: 4,152
Likes: 0
Received 0 Likes
on
0 Posts
New rotary shop in Pittsburg Kansas
Ok my friend Poncho just opened a performance shop here in Pittsburg. I just wanted to inform that he's doing a special price on a rebuilt for the first 5 motor. I don't know if this is going to be deleted but I just wanted members knows around the area.
#2
Junior Member
Join Date: Oct 2001
Location: Puyallup, Wa
Posts: 8
Likes: 0
Received 0 Likes
on
0 Posts
Where in Pittsburg? Funny I finally move after living there for 10 years and someone finally opens up a performance shop that will work on rotaries. Just my luck lol.
#3
Eats, Sleeps, Dreams Rotary
Thread Starter
iTrader: (13)
Join Date: Aug 2002
Location: Pittsburg, KS.
Posts: 4,152
Likes: 0
Received 0 Likes
on
0 Posts
127 W 15th street. Yeah finally I got him going down here to show the V8 guy that import can be as fast next year is going to be a surprising year for rotary, we got a low to high 7's rx2 so keep track of this ongoing thread.
#4
Junior Member
Join Date: Oct 2001
Location: Puyallup, Wa
Posts: 8
Likes: 0
Received 0 Likes
on
0 Posts
So behind tailwind? Cool man. Congrats on the new shop! You don't see that many rotaries in pittsburg, I can only think of three people. The person off of 10th and stillwell with the sa22 and the occasional fc, the guy that had the FD near 11th and smelter(it has been replaced with a c3 vette) and the guy in frontenac off of hugh street with the 70000 rx7's in the driveway. How is it that I missed you?
#5
Eats, Sleeps, Dreams Rotary
Thread Starter
iTrader: (13)
Join Date: Aug 2002
Location: Pittsburg, KS.
Posts: 4,152
Likes: 0
Received 0 Likes
on
0 Posts
So behind tailwind? Cool man. Congrats on the new shop! You don't see that many rotaries in pittsburg, I can only think of three people. The person off of 10th and stillwell with the sa22 and the occasional fc, the guy that had the FD near 11th and smelter(it has been replaced with a c3 vette) and the guy in frontenac off of hugh street with the 70000 rx7's in the driveway. How is it that I missed you?
#6
Junior Member
Join Date: Oct 2001
Location: Puyallup, Wa
Posts: 8
Likes: 0
Received 0 Likes
on
0 Posts
Cool beans man!! I always wondered who that was at that house. You know who owned the fd that parked at dillons a few years back? You ever race a mokan? I take it you have. I met someone a few years back... prob 04ish, that had a black s4 TII that hailed from pburg. ran roughly 14.2, so I figured it was stock. You know him? Seemed like a good guy.
#7
Eats, Sleeps, Dreams Rotary
Thread Starter
iTrader: (13)
Join Date: Aug 2002
Location: Pittsburg, KS.
Posts: 4,152
Likes: 0
Received 0 Likes
on
0 Posts
Cool beans man!! I always wondered who that was at that house. You know who owned the fd that parked at dillons a few years back? You ever race a mokan? I take it you have. I met someone a few years back... prob 04ish, that had a black s4 TII that hailed from pburg. ran roughly 14.2, so I figured it was stock. You know him? Seemed like a good guy.
Trending Topics
#8
Shooting for 500
iTrader: (3)
I'm the guy who had the "black" green TII. I'm heading up to Mo-Kan next Sunday and will go check the shop out. I met Poncho before in KC. He is a knowledgeable guy who knows how to make power on rotary engines and build fast drag machines. Isn't his rx2 in the 8s now?
Josh
Josh
#9
Eats, Sleeps, Dreams Rotary
Thread Starter
iTrader: (13)
Join Date: Aug 2002
Location: Pittsburg, KS.
Posts: 4,152
Likes: 0
Received 0 Likes
on
0 Posts
I'm the guy who had the "black" green TII. I'm heading up to Mo-Kan next Sunday and will go check the shop out. I met Poncho before in KC. He is a knowledgeable guy who knows how to make power on rotary engines and build fast drag machines. Isn't his rx2 in the 8s now?
Josh
Josh
Yes he ran 8.81 but that was his old setup. Next coming year would be exciting and we're looking to head east to compete at afew events there.
#14
Eats, Sleeps, Dreams Rotary
Thread Starter
iTrader: (13)
Join Date: Aug 2002
Location: Pittsburg, KS.
Posts: 4,152
Likes: 0
Received 0 Likes
on
0 Posts
I know PFC but my laptop crashed with the software and maps I saved. It is not hard to tune the PFC but if you can wait I would recommend Steve Kan to tune it. If you got a datalogit it make it alot easier. Poncho knows the microtech very well.
#21
r074r'/ |\|00B
iTrader: (14)
Join Date: Jan 2002
Location: KC, KS
Posts: 922
Likes: 0
Received 0 Likes
on
0 Posts
I tuned it so that it is running a little rich until I can have a pro do it. At first it was lean so I added fuel to prevent any bad things happening. I am in the process of doing some upgrades (IE better twins, new exhaust, EBC) so I wanted to do all my mods before taking it somewhere. In the spring I'll look for a Steve Kan event or maybe drive it up to Banzai.
Unless James, you think your place can do it? Pittsburg KS alot closer than Indiana.
Unless James, you think your place can do it? Pittsburg KS alot closer than Indiana.
#22
Eats, Sleeps, Dreams Rotary
Thread Starter
iTrader: (13)
Join Date: Aug 2002
Location: Pittsburg, KS.
Posts: 4,152
Likes: 0
Received 0 Likes
on
0 Posts
I tuned it so that it is running a little rich until I can have a pro do it. At first it was lean so I added fuel to prevent any bad things happening. I am in the process of doing some upgrades (IE better twins, new exhaust, EBC) so I wanted to do all my mods before taking it somewhere. In the spring I'll look for a Steve Kan event or maybe drive it up to Banzai.
Unless James, you think your place can do it? Pittsburg KS alot closer than Indiana.
Unless James, you think your place can do it? Pittsburg KS alot closer than Indiana.
#25
SAVE FOR EFI
iTrader: (4)
Join Date: Apr 2005
Location: Newton,KS.
Posts: 486
Likes: 0
Received 0 Likes
on
0 Posts
NICE TO HEAR!!! I've been wrenching on my own rotaries (FB n/a, FC n/a, FD Single, FE) for years....I'm graduating from WyoTech in March.....is he looking to hire any help? This would be a dream come true!! I'm from the Wichita area.