Looking to get my fd3 dyno’d and tuned...any events or groups coming up?

 

Call up Elite Rotary Shop and see when the next tunning event is. I've been tunedby Nelson several times, he's the best.

 

Banzai racing is where you want to go. He is first hand a builder and tuner.

Where other shops as mentioned have to fly out some random guy. Who is a joke!

You want someone who knows how to build a rotary and tune them in house.


I’d stay far away from that horrible shop In Schaumburg,Il
Nothing but lies, it’s just a money grab

 

I don't know if you have an issue with any of the local shops or not, sounds like you do, but in no way, shape or form can you talk **** a out Nelson.

I've been tuned by a few other rotary specialists, and no one comes close the the professionalism and care that Nelson gives to your car.

If your car has an issue on the dyno, he gives ideas on what's wrong and how to properly remedy them, rather than just say, pull your **** off the dyno, next.

If it's at all in my power to get tuned by Nelson, i do so. I've seen what's je's done to other cars let alone my fleet.

 

nelson is the worst he’s just a full throttle tuner
he sucks! Nelson knows nothing about how the motors operate, he barley knows how to check timing. Nelson doesn’t even have a shop. That should say enough. The guy is a buzz head who can barley form a sentence.

Banzai is the go to guy there’s a reason he’s been in business for 10plus yrs.
And a short drive from Chicago.

No need to wait for some shameful tuning event. Ran by some loud mouth and brain dead tuner.

Do it right the first time.
There’s a reason no ones thanking that Schaumburg shop.

 

Let me guess, you were the dude with the red fd that was on a microtech.

Hes not at all "just a full throttle" tuner. He use to own his own shop and closed it because he was constantly tuning, and being flown out for tuning sessions and was spending time at his shop.

There's a reason Built 2 Apex and Mazdatrix use him.

 

Oh I forgot your buddy’s with this shop

you just confirmed what I said

he has no shop , very limited use

like I said no need to wait for some BS tuning event

DO IT RIGHT THE FIRST TIME
BANZAI RACING
Enough said

 

I'm friends with most rotary shops, Sal at Elite rotary included. The difference is, I can build my own car unlike yourself.

I've ordered plenty of things from Banzai, I have no complaints about Chris.

What I am saying is, you're a fool if you don't get tuned by Nelson. I don't care what shop he's tuning for, I'd still get tuned by him.

Unfortunately for you, your red fd wasn't up to the task of getting fully tuned.

A dyno is a tool, it helps us not only get the most potential put of our cars performance, but it also identifies issues. Your car had a **** load of issues. No tuner in the world was going to be able to fix your car on the spot.

 

yup banzai corrected all of your buddies elite rotarys mistakes

like i said nelson is a numb nuts

not knowing how to set timing or how to build a rotary

looks like good ol ari did built 2 apex’s tune on the na 4rotor


it would be funny to see you again


elite and nelson are both full of **** add your name to the list to guy........

 

You sir are a dumb ***. The built to apex car is a 3 rotor tuned by Nelson. Nelson logs in for every drift event to ensure max power for each environment.

Nothing that was ordered from banzai was to correct anything from elite.

I look forward to seeing you again, hit me up when your car runs and drive again. Get the **** outta here with the fake tough guy act.

Want to inform everyone that your car came in with 0 compression from sitting from your neglect. And instead of rebuilding it like you should have, Sal at elite soaked the engine and spun it, and spin it until the seals freed up? Funny, I bet you leave that out every time you talk ****.

 

my motor has great compression
and starts every time
thanks BANZAI


see you soon Sweetheart

 

I look forward to it.

 

 

Are there any tuning dates in the works? I tried to contact elite in the past w no success and banzai who I would like to do it won’t touch a car with any ethanol e85 or a blend .

 

Elite has a tuning event this upcoming weekend, and then the next one is in July sometime.

 

That back yard shop called elite

I forgot Fritz Flynn had a expensive experience with lawnmower man sal
too
no oil in the trannie amongst other elite goodies they did
ask Irp he did the clean up

 

If the tyranny didn't have oil in it, how did it last on the dyno for several hours? If there was no oil in it how did Fritz drive it with no issues?

 

Well IRP
did the clean up and tune sure Ihor will agree with that

not lawnmower man or brain dead nelson

from what I heard quite the elite experience from Fritz

seems like your ***** deep on lawnmower man

 

Do lots of drama going on ? I have heard of Nelson s before and he has tuned lots of Rotary’s do u know if he will do a matrix mode microtech tune? I’m in St. Louis and there are a few local dynos just no rotary guys that tune here. I’ve tried to contact elite in the past w no luck , one time a girl answered and and said that I would be called back no call. I’m interested I guess I will try calling again this week. Has anyone on here been tuned by Nelson before ?
im looking for good drivability and power? How much time does he get to spend with one car?
whst are prices?
i really wood like banzai yo time mine but for some rediculis reason they don’t do e85 or e50 ? No ethanol?
or steve Kan he did my old car back in the day? Does he still travel?

 

My cars are all Microtech lt10-s, 2 are normal mode, 1 in matrix. Never had an issue with Nelson. I've also been tuned by Steve, having said that, I will tune with Nelson every chance I get.

The "drama" is because dude had a bad experience with elite, because he brought a hacked *** car with no compression and wanted to be cheap with getting his car running.

I will say this again..... I don't care who Nelson is affiliated with, I would get tuned by him regardless of what shop he is with.

Nelson found me 10 more peak hp and averaged 50 more hp across the entire power band over Steve. No changes to the car between the tunes, same dyno used.

 

Does the matrix tuned car run better than normal

 

Hard to compare apples to apples because both builds are so different, but I'd say they are equal as far as driveability goes. The matrix mode tuned car was tuned that way because of the injector sizing and to tune the transition better. 720 and 1680 injectors

 

JACK FACE
YOU FORGOT
elite did work on my car all that backwards wiring

horrible fuel setup elite
hacked wiring harnesses elite

like I said Your bolls Deep on lawnmower man

maybe that free intake is why you
advertise so hard for elite

It’s funny cause I took my car from elite to get tuned With the work done by lawnmower man
elite same day

funny how lawnmower man seems to have cheated me and others

keep riding for lawnmower tho


seems like your getting something outta people getting scammed
you keep recommending elite


theres a reason

why lawnmower man is banned from a shop right??

Shed some light on that??


Something about him stealing parts off of cars

 

Intake wasn't free. Was I the Guinea pig, yes I was.

Your wiring was **** before them. I saw it in person.

You seem to miss the point, I'm not going t on bat for elite.... I'm going to bat for Nelson. They aren't they same.

You need to understand that.

Or did you smoke to much today and can't you ******* comprehend?

I'm done with you dude. You're not gonna agree with me, nor me with you.

For the record, I have no issues with Chris at Banzai, and I hope he gets you **** up and running. More rx7s on the road the better.

 

funny topic about being banned and stealing parts is lawnmower mans forte
seems like that hit on something for you
maybe you have something to do with that
dont get all quiet now

sweet pea