Illinois crew....Any Dyno/tune session anytime soon?
Looking to get my fd3 dyno’d and tuned...any events or groups coming up?
|
Originally Posted by Boost22lbs
(Post 12344008)
Looking to get my fd3 dyno’d and tuned...any events or groups coming up?
|
Originally Posted by Boost22lbs
(Post 12344008)
Looking to get my fd3 dyno’d and tuned...any events or groups coming up?
Where other shops as mentioned have to fly out some random guy. Who is a joke! You want someone who knows how to build a rotary and tune them in house. I’d stay far away from that horrible shop In Schaumburg,Il Nothing but lies, it’s just a money grab |
Originally Posted by the one
(Post 12346647)
Banzai racing is where you want to go. He is first hand a builder and tuner.
Where other shops as mentioned have to fly out some random guy. Who is a joke! You want someone who knows how to build a rotary and tune them in house. I’d stay far away from that horrible shop In Schaumburg,Il Nothing but lies, it’s just a money grab I've been tuned by a few other rotary specialists, and no one comes close the the professionalism and care that Nelson gives to your car. If your car has an issue on the dyno, he gives ideas on what's wrong and how to properly remedy them, rather than just say, pull your shit off the dyno, next. If it's at all in my power to get tuned by Nelson, i do so. I've seen what's je's done to other cars let alone my fleet. |
Originally Posted by rotorhead_izzy
(Post 12346711)
I don't know if you have an issue with any of the local shops or not, sounds like you do, but in no way, shape or form can you talk shit a out Nelson.
I've been tuned by a few other rotary specialists, and no one comes close the the professionalism and care that Nelson gives to your car. If your car has an issue on the dyno, he gives ideas on what's wrong and how to properly remedy them, rather than just say, pull your shit off the dyno, next. If it's at all in my power to get tuned by Nelson, i do so. I've seen what's je's done to other cars let alone my fleet. he sucks! Nelson knows nothing about how the motors operate, he barley knows how to check timing. Nelson doesn’t even have a shop. That should say enough. The guy is a buzz head who can barley form a sentence. Banzai is the go to guy there’s a reason he’s been in business for 10plus yrs. And a short drive from Chicago. No need to wait for some shameful tuning event. Ran by some loud mouth and brain dead tuner. Do it right the first time. There’s a reason no ones thanking that Schaumburg shop. |
Originally Posted by the one
(Post 12346993)
nelson is the worst he’s just a full throttle tuner
he sucks! Nelson knows nothing about how the motors operate, he barley knows how to check timing. Nelson doesn’t even have a shop. That should say enough. The guy is a buzz head who can barley form a sentence. Banzai is the go to guy there’s a reason he’s been in business for 10plus yrs. And a short drive from Chicago. No need to wait for some shameful tuning event. Ran by some loud mouth and brain dead tuner. Do it right the first time. There’s a reason no ones thanking that Schaumburg shop. Hes not at all "just a full throttle" tuner. He use to own his own shop and closed it because he was constantly tuning, and being flown out for tuning sessions and was spending time at his shop. There's a reason Built 2 Apex and Mazdatrix use him. |
Originally Posted by rotorhead_izzy
(Post 12347264)
Let me guess, you were the dude with the red fd that was on a microtech.
Hes not at all "just a full throttle" tuner. He use to own his own shop and closed it because he was constantly tuning, and being flown out for tuning sessions and was spending time at his shop. There's a reason Built 2 Apex and Mazdatrix use him. Oh I forgot your buddy’s with this shop you just confirmed what I said he has no shop , very limited use like I said no need to wait for some BS tuning event DO IT RIGHT THE FIRST TIME BANZAI RACING Enough said |
Originally Posted by the one
(Post 12347480)
Oh I forgot your buddy’s with this shop
you just confirmed what I said he has no shop , very limited use like I said no need to wait for some BS tuning event DO IT RIGHT THE FIRST TIME BANZAI RACING Enough said I've ordered plenty of things from Banzai, I have no complaints about Chris. What I am saying is, you're a fool if you don't get tuned by Nelson. I don't care what shop he's tuning for, I'd still get tuned by him. Unfortunately for you, your red fd wasn't up to the task of getting fully tuned. A dyno is a tool, it helps us not only get the most potential put of our cars performance, but it also identifies issues. Your car had a shit load of issues. No tuner in the world was going to be able to fix your car on the spot. |
Originally Posted by rotorhead_izzy
(Post 12347567)
i'm friends with most rotary shops. The difference is, i can build my own car unlike yourself.
I've ordered plenty of things from banzai, i have no complaints about chris. What i am saying is, you're a fool if you don't get tuned by nelson. I don't care what shop he's tuning for, i'd still get tuned by him. Unfortunately for you, your red fd wasn't up to the task of getting fully tuned. A dyno is a tool, it helps us not only get the most potential put of our cars performance, but it also identifies issues. Your car had a shit load of issues. No tuner in the world was going to be able to fix your car on the spot. yup banzai corrected all of your buddies elite rotarys mistakes like i said nelson is a numb nuts not knowing how to set timing or how to build a rotary looks like good ol ari did built 2 apex’s tune on the na 4rotor it would be funny to see you again elite and nelson are both full of shit add your name to the list to guy........ |
Originally Posted by the one
(Post 12347574)
yup banzai corrected all of your buddies elite rotarys mistakes
like i said nelson is a numb nuts not knowing how to set timing or how to build a rotary looks like good ol ari did built 2 apex’s tune on the na 4rotor it would be funny to see you again elite and nelson are both full of shit add your name to the list to guy........ Nothing that was ordered from banzai was to correct anything from elite. I look forward to seeing you again, hit me up when your car runs and drive again. Get the fuck outta here with the fake tough guy act. Want to inform everyone that your car came in with 0 compression from sitting from your neglect. And instead of rebuilding it like you should have, Sal at elite soaked the engine and spun it, and spin it until the seals freed up? Funny, I bet you leave that out every time you talk shit. |
Originally Posted by rotorhead_izzy
(Post 12347576)
You sir are a dumb ass. The built to apex car is a 3 rotor tuned by Nelson. Nelson logs in for every drift event to ensure max power for each environment.
Nothing that was ordered from banzai was to correct anything from elite. I look forward to seeing you again, hit me up when your car runs and drive again. Get the fuck outta here with the fake tough guy act. Want to inform everyone that your car came in with 0 compression from sitting from your neglect. And instead of rebuilding it like you should have, Sal at elite soaked the engine and spun it, and spin it until the seals freed up? Funny, I bet you leave that out every time you talk shit. and starts every time thanks BANZAI see you soon Sweetheart |
Originally Posted by the one
(Post 12347582)
my motor has great compression
and starts every time thanks BANZAI see you soon Sweetheart |
:popcorn::popcorn::popcorn:
|
Are there any tuning dates in the works? I tried to contact elite in the past w no success and banzai who I would like to do it won’t touch a car with any ethanol e85 or a blend .
|
Originally Posted by johnrx2
(Post 12349538)
Are there any tuning dates in the works? I tried to contact elite in the past w no success and banzai who I would like to do it won’t touch a car with any ethanol e85 or a blend .
|
That back yard shop called elite
I forgot Fritz Flynn had a expensive experience with lawnmower man sal too no oil in the trannie amongst other elite goodies they did ask Irp he did the clean up |
Originally Posted by the one
(Post 12349790)
That back yard shop called elite
I forgot Fritz Flynn had a expensive experience with lawnmower man sal too no oil in the trannie amongst other elite goodies they did ask Irp he did the clean up |
Originally Posted by rotorhead_izzy
(Post 12349794)
If the tyranny didn't have oil in it, how did it last on the dyno for several hours? If there was no oil in it how did Fritz drive it with no issues?
Well IRP did the clean up and tune sure Ihor will agree with that not lawnmower man or brain dead nelson from what I heard quite the elite experience from Fritz seems like your Balls deep on lawnmower man |
Do lots of drama going on ? I have heard of Nelson s before and he has tuned lots of Rotary’s do u know if he will do a matrix mode microtech tune? I’m in St. Louis and there are a few local dynos just no rotary guys that tune here. I’ve tried to contact elite in the past w no luck , one time a girl answered and and said that I would be called back no call. I’m interested I guess I will try calling again this week. Has anyone on here been tuned by Nelson before ?
im looking for good drivability and power? How much time does he get to spend with one car? whst are prices? i really wood like banzai yo time mine but for some rediculis reason they don’t do e85 or e50 ? No ethanol? or steve Kan he did my old car back in the day? Does he still travel? |
Originally Posted by johnrx2
(Post 12349815)
Do lots of drama going on ? I have heard of Nelson s before and he has tuned lots of Rotary’s do u know if he will do a matrix mode microtech tune? I’m in St. Louis and there are a few local dynos just no rotary guys that tune here. I’ve tried to contact elite in the past w no luck , one time a girl answered and and said that I would be called back no call. I’m interested I guess I will try calling again this week. Has anyone on here been tuned by Nelson before ?
im looking for good drivability and power? How much time does he get to spend with one car? whst are prices? i really wood like banzai yo time mine but for some rediculis reason they don’t do e85 or e50 ? No ethanol? or steve Kan he did my old car back in the day? Does he still travel? The "drama" is because dude had a bad experience with elite, because he brought a hacked ass car with no compression and wanted to be cheap with getting his car running. I will say this again..... I don't care who Nelson is affiliated with, I would get tuned by him regardless of what shop he is with. Nelson found me 10 more peak hp and averaged 50 more hp across the entire power band over Steve. No changes to the car between the tunes, same dyno used. |
Does the matrix tuned car run better than normal
|
Originally Posted by johnrx2
(Post 12349846)
Does the matrix tuned car run better than normal
|
Originally Posted by rotorhead_izzy
(Post 12349841)
My cars are all Microtech lt10-s, 2 are normal mode, 1 in matrix. Never had an issue with Nelson. I've also been tuned by Steve, having said that, I will tune with Nelson every chance I get.
The "drama" is because dude had a bad experience with elite, because he brought a hacked ass car with no compression and wanted to be cheap with getting his car running. I will say this again..... I don't care who Nelson is affiliated with, I would get tuned by him regardless of what shop he is with. Nelson found me 10 more peak hp and averaged 50 more hp across the entire power band over Steve. No changes to the car between the tunes, same dyno used. YOU FORGOT elite did work on my car all that backwards wiring horrible fuel setup elite hacked wiring harnesses elite like I said Your bolls Deep on lawnmower man maybe that free intake is why you advertise so hard for elite It’s funny cause I took my car from elite to get tuned With the work done by lawnmower man elite same day funny how lawnmower man seems to have cheated me and others keep riding for lawnmower tho seems like your getting something outta people getting scammed you keep recommending elite theres a reason why lawnmower man is banned from a shop right?? Shed some light on that?? Something about him stealing parts off of cars |
Originally Posted by the one
(Post 12349858)
JACK FACE
YOU FORGOT elite did work on my car all that backwards wiring horrible fuel setup elite hacked wiring harnesses elite like I said Your bolls Deep on lawnmower man maybe that free intake is why you advertise so hard for elite It’s funny cause I took my car from elite to get tuned With the work done by lawnmower man elite same day funny how lawnmower man seems to have cheated me and others keep riding for lawnmower tho Your wiring was shit before them. I saw it in person. You seem to miss the point, I'm not going t on bat for elite.... I'm going to bat for Nelson. They aren't they same. You need to understand that. Or did you smoke to much today and can't you fucking comprehend? I'm done with you dude. You're not gonna agree with me, nor me with you. For the record, I have no issues with Chris at Banzai, and I hope he gets you shit up and running. More rx7s on the road the better. |
Originally Posted by rotorhead_izzy
(Post 12349860)
Intake wasn't free. Was I the Guinea pig, yes I was.
Your wiring was shit before them. I saw it in person. You seem to miss the point, I'm not going t on bat for elite.... I'm going to bat for Nelson. They aren't they same. You need to understand that. Or did you smoke to much today and can't you fucking comprehend? I'm done with you dude. You're not gonna agree with me, nor me with you. For the record, I have no issues with Chris at Banzai, and I hope he gets you shit up and running. More rx7s on the road the better. funny topic about being banned and stealing parts is lawnmower mans forte seems like that hit on something for you maybe you have something to do with that dont get all quiet now sweet pea |
All times are GMT -5. The time now is 07:03 PM. |
© 2024 MH Sub I, LLC dba Internet Brands