arent turbo and NA the same?
ive got an NA one if you need it that bad.

 

im not sure if they are, but if they are, that makes things way easier.

 

im fairly sure they are, but ill check for you real quick if you want...be back....

 

ok, thanks

 

yup, same part number from mazda, and same resistance settings according to haynes.

 

awesome.

 

does anyone want to buy a racingbeat catback for a turbo ii? i want to sell mine.

 

yeah i picked that one up it still needs some work like clutch slave and master cylinder and a couple other little things like maybe a starter but its been way to cold to work on it once i do get it going ill give you a ring and well go cruise cause id really like to see your car

 

someone sell me a TII swap locally lol

 

my brother would be interested in the catback and i have a tii throttle body with tps not sure of the condition but it came from the parts i got from you, you can check it out if you want i dont think i have a need for them right now the turbo swap is in the future

 

i think e dogg has the stuff i cant say if he would sell it but for the right price im sure he would think about it

 

Its funny talking to E and Jason about the parts they have on the farm. At this point I don't think either one of them know exactly what they have or who owns it

 

Anyone have a set of 4-pot calipers? I don't care what kind of shape they are in.

Jesse

 

well, i got a tps from jesse tonight, but it turns out that it wasn't causing my problems. i'm not sure what it is and it's pissing me off.

 

steve, im not sure what i want for the catback. tell your brother to make an offer if he is interested.

 

anyone have some gsl-se injectors that they want to sell?


edit: or s4 tii injectors

 

Is anyone interested in buying my 1993 RX7? It is not starting and I am not sure why. I don't want to sell it but I don't have the time or money to fix it up right now. I do not have pictures yet but if you will be near Hampton, IA 50441 anytime let me know and you can come see it. I still owe about $10,000 so make any kind of offer.

I think what it needs is Coolant seals. Not quite sure. It has been to cold out on the weekends to get out and do a compression test.

My email is tylerpohlman@gmail.com
or
pokerpohlman@hotmail.com

phone # is 1.641.456.5505 (leave a message because I will probably be at work)

When it gets warm I will try and get it to the car wash, wash it up, and then take some pictures. Since I don't have pictures right now that is why I am posting it here since it is local and possibly close enough for anyone to stop by and check it out.

 

What are the specs on it? I'm busy with school now but spring break is in a couple weeks so maybe i'll come up and look at it then.

 

we would know if we went out there and looked, but Eric and Jason don't go outside when its cold

as for:
I have 2 TII motors assembled and one thats broken down- they all most likley need a rebuild before they can be used.

We may consider building and selling a motor for the right price, but i don't know if thats what you are after...

 

1993 Mazda RX7

about 74,000 miles

Red with black leather interior

Bose System (I took the bose system out to put aftermarket in but still have Bose)

Greddy Exaust

Does not start due to possible coolant seals or something with fuel (injectors, pump, filter)

The drivers side door handle broke off when it was really cold out.

Does need some TLC but I am willing to work something out.

I have to systems if anyone is interested that I can add. One retails around $500 and the other retails about $5000-6000+

 

I believe your looking for low impedence injectors. S4's came in both high and low impedences since the 88's and 10AE removed the resistor bank.

I'm sure we can find a couple low impedence 550cc injectors. I would recomend getting them cleaned and flow tested. That requires little money and would ensure proper flow.

 

LOL hampton is a way out of my way but I'll buy your fender inserts and front sway bar.

(Looks up to see the vultures circle'n).

If the price is right I might think about getting another.

 

then u can park it in the garage out here and forget whos it is

 

Anyone have a dr. side inner tie rod for manual rack or any side from a p/s rack?

FC.

Thanks.
Jesse

 

Edogg what we talkin for a price on the motor...and one that needs rebuilt price wise...let me know a.s.a.p an d does anyone have a TII transmission in good shape for sale