IanS

iTrader: (4)

Just a small update on the powdercoat thing. I recently tested the neon valve cover (coated white, first try looks pretty decent). I poured some high mileage oil (~5K miles) on it and let it sit for about 36-40 hours and then proceded to spray it down with super tech engine degreaser to see if the coat would stain. It did stain it (lightly) but I am certain that a little more work and it would clean up. I also sprayed the same type of degreaser in a spot and let it sit for the same length of time. It did not peel the paint or cause it to bubble, although it did however take some of the glossiness out of it. Remember, this piece was sitting on the floor and sat at room temperature for the whole time and was not rinsed off until the test was completed. In my opinion the powdercoating held up fairly well and would definately dress up some engine bays. I am still in the learning/practicing stage so if anyone wants me to try out some parts I can. I would like to stay with steel parts for now as I have not yet tested aluminum. I am also going to be testing some "odd" parts off my protege to see if I can do a few more specialty type objects. Pics to come soon...


Oh and I also smacked the valve cover with a wrench to see how bad it would chip. The only part that came off was the small spot that was actually struck, not an area like regular paint would. I also scracthed the valve cover lightly (hard enough to scrape paint off) to see what the effects were. I was very pleased as you can see the scratches but they did not actually remove the powder coat paint. If anyone is interested in some small test pieces being done PM me and we can figure something out.

-Ian

FC_DRIFTER

I think it would be sweet. Now I just need to think of some stuff to powdercoat.

RX7_2ner

my harness has s5 tii injector plugs spliced into it, so it wouldn't work unless you put other injector plugs on it.

Sesshoumaru

iTrader: (1)

Did you remove the resistor pack then?

driftfc87

iTrader: (6)

my clutch is making some weird *** screeching noises when it first starts up and when you push the clutch in im thinking throw out bearing or pilot bearing any input would be greatly appreciated oh clutch still engages fine but smokes after awhile peace out

BinaryRotary

Ian, wazzup! Steve, wazzup!

E Dogg

iTrader: (1)

I just got a line on autocross in waterloo, http://www.iowaregionscca.org/ is the website..
I think i might get my money outta my 240 by beating it to death this weekend instead of selling it

FC_DRIFTER

Update on my 87 TII.....unfortunately I don't think I'm going to be able to get the title. The car was sold as a "No Title" auction, now I'm trying to figure out if I should sell as a whole or part it out. I don't want to part it out as I don't have the time. I'll sell the car as a whole for $1,500.

E Dogg

iTrader: (1)

Hey if you wanna come up anyways ill make sure i go, i jsut tryin make 240 idle before i go up haha

heres the link right to the event sorry http://www.iowaregionscca.org/calend...uid=2417070730

driftfc87

iTrader: (6)

what up binary rotary do i know u
aron price for car seems a little high i got a 88 with near perfect leather interior body was about the same as the one u have and this one ran perfect and i got it for 1600 with a clean title just my opinion but if someone would buy it for that more power to you

FC_DRIFTER

Well, name a price. I've never sold a TII, not sure what they sell for. Are you still interested in the car? There is a chance that the title can still be gotten (but not by me) You would have to contact the previous owner, and have him get a replacement title, and either you or him would have to pay for the previous registration fees. I didn't really want to deal with the hassle.

IanS

iTrader: (4)

Holy crap, I thought you died lol. I was actually right by your house a few weeks ago but was seriously pressed for time or I would have swung by and said hey. Cal me up sometime (sun-tues are best).

driftfc87

iTrader: (6)

the way it sits i wouldnt pay more than 5-600 for it if thats something you could do then i would think about it but i dont know what you got into it

RX7_2ner

anyone want these?

new rotary aviation apex seals and springs - $150
new fd corner seals - $60
rotary engine stand adapter - $40

BinaryRotary

Yeah you know me, its BEN!!! I've been dead, heres my new cell # 505-9698

BinaryRotary

Lol, I'm alive, just picked up a 1988 Vert from Minnesota, swapping in a new motor as we speak.

driftfc87

iTrader: (6)

holy **** i saw you that one day when i was towing the rx7 i got for free i tried calling you alot damn hell yeah im goin to have to give you a call one of these nights check out the new ride you got do you still have the first gen

hey josh how much for the shell and the other stuff you have

BinaryRotary

Yeah, my wife is fantastic at relaying phone messages. Give me a call sometime man, I hope to have this vert up and running by next week. The 1st gen is gone, sold it to a guy in Chicago, hated to see it go but I needed the cash.

RX7_2ner

maybe $250 for the shell... i'm not sure. i still have my 3" corkport catback, dp and mp, i'll sell that for $250 obo. maybe $1000 for all of the stuff i have or you can make an offer. you guys can come look at everything or i can take pics. pm me for my cell number.

BinaryRotary

Ughhhh ... 8:30 am .... swapping motors sucks ...... not to mention I snapped by clutch hose and no one carries it in town.

Sesshoumaru

iTrader: (1)

I'll take the engine stand.

Do you have the gaskets (water/oil) for the RA kit?

driftfc87

iTrader: (6)

i might have one of those hoses you need ill give you a call or at least i know where we can get one

hey J you get your fd yet or is it still broke whatever happened with the whole ordeal

Sesshoumaru

iTrader: (1)

It's at my Dads and doe not go into reverse and grinds in 5th gear. My 5th gear syncro is shot.

RX7_2ner

I still have stuff for sale.

RA apex seals and springs
fd corner seals
ss braided clutch line - pending
housing and irons
s5 ps pump
re-amemiya fuel computer for s4(same one that was used on the re-amemiya twin turbo fc)
racing beat intake bridgeport porting template
racing beat streetable exhaust porting template
2 blown s4 tii engines


stuff that is sold

tii shell and full 3" exhaust - steve
walbro fp - jesse
engine stand adapter - jason

rotor88

iTrader: (1)

Thanks RX7 2ner, pump works great. Jesse