Microtech Will not boost
#1
Junior Member
Thread Starter
Join Date: May 2002
Location: Poulsbo, WA
Posts: 38
Likes: 0
Received 0 Likes
on
0 Posts
Will not boost
Have a LT-8. The injectors were leaky so I changed them. I have 550's below and 1000's up top. I changed the throttle body and tps and now my car does not boost up and craps out at about 3600 rpm. I calibrated the tps and the timing is okay also. It revs a little sluggish and will just stop revving and backfire at 3600 rpm. Can anyone tell me why it is so overly rich and why it is doing this.
#3
Senior Member
just out of curosity, did you change the injector duty when you changed the injectors from 550's to 1000's? leaveing the same map in there for those injectors will basically double the fuel output when they come on due to the duty cycle....
Daniel
Daniel
#5
Senior Member
hrmmm, where did you get injectors from and how much did they cost? if you want to get rid of your old 900's ill gladly take them off your hands.... shoot me an email at bejbis@comcast.net, or an IM on AIM at screen name Bejbis
Daniel
Daniel
Thread
Thread Starter
Forum
Replies
Last Post
Shainiac
Single Turbo RX-7's
12
07-17-19 02:20 PM
Jeff20B
1st Generation Specific (1979-1985)
73
09-16-18 07:16 PM